Calculate Rise and Run Dimensions
From How to Lay Out a Stair Stringer with a Framing Square · Step 3 of 6 · Video by Essential Craftsman

Showing 3:02–4:45 of the source video. Watch the full video with every moment.
What happens in this clip
Using the total vertical rise measurement (from the finished floor downstairs to the finished floor upstairs) and the new number of desired rises (incorporating the extra rise gained from header adjustment), calculate the exact height for each individual rise. Similarly, calculate the exact depth for each individual tread (run) by dividing the total horizontal run by the number of treads (which is typically one less than the number of rises). The video demonstrates calculations: Total Rise = 121 7/8 inches (121.875 decimal) divided by 16 rises equals 7.61 inches, converted to 7 5/8 inches per rise (within 8-inch max code). Total Run = 144 3/8 inches (144.375 decimal) divided by 15 treads equals 9.625 inches, converted to 9 5/8 inches per tread (within 9-inch min code). Ensure these dimensions adhere to local building codes for safety and comfort.
Goal: Accurately calculate the individual rise and run dimensions for each stair step based on the total rise and the required number of steps to ensure code compliance.
What's used
Tools
- Calculator
- Pencil
Materials
- Lumber Board (for calculations)
About the full video
This video details the process of correcting a previously misbuilt staircase. It covers the removal of non-code-compliant stringers, adjustment of the header for an additional rise, precise calculation and marking of new stringer dimensions, cutting and installation of notched stringers, and final securing of risers and treads to create a safe, code-compliant, and comfortable staircase.
Step 3 of 6: Calculate Riser and Tread Dimensions
Now that you have the exact number of risers and treads, calculate the precise height for each riser and the depth for each tread. Divide the total rise by the number of risers to get the exact riser height. For example, if your total rise is 108 inches and you've decided on 15 risers, each riser will be 108 / 15 = 7.2 inches. To determine the tread depth (also known as going), divide the total run by the number of treads. Ensure that the tread depth meets local building code requirements, which typically range from 9 to 10 inches for comfortable use. The sum of one riser height and one tread depth should ideally be between 17 and 18 inches for comfortable walking.
Every video in How to Lay Out a Stair Stringer with a Framing Square
Step 1: Determine Total Rise and Run
- 0:15–0:29 Measure Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Risers and Treads
- 2:59–6:51 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers
- 8:59–9:54 Calculate Number of Risers and Treads
Step 3: Calculate Riser and Tread Dimensions
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 0:29–1:07 Calculate Rise and Run
- 3:02–4:45 Calculate Rise and Run Dimensions (this video)
Step 4: Mark the Stair Stringer with a Framing Square
- 2:53–7:59 Mark the Stringers and Adjust for Treads
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 6:59–9:34 Mark the Stair Stringer for Cutting
Step 5: Mark the Nosing and Final Cut
- 3:45–4:47 Correct Straight Stringer Layout
- 8:10–9:35 Mark Top and Bottom Stringer Cuts
- 3:10–3:59 Mark the Stringer Board
Step 6: Cut the Stair Stringer
- 0:42–0:53 Cut the Stringers
- 15:12–19:27 Cutting the Stair Stringer
- 2:42–3:34 Cut Stair Stringers
How to Lay Out a Stair Stringer with a Framing Square
This project outlines the process of accurately marking and laying out a stair stringer using a framing square, a crucial step for ensuring safe and correctly proportioned stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

