Calculate Individual Riser Height & Tread Depth
From How to Lay Out a Stair Stringer with a Framing Square · Step 3 of 6 · Video by AwesomeFramers

Showing 2:05–2:24 of the source video. Watch the full video with every moment.
What happens in this clip
Using the total calculated rise of 119 3/8 inches, divide this by the total number of risers (16). This calculation yields an individual riser height of 7 7/16 inches. This ensures all risers are equal in height, which is essential for safety and craftsmanship. Simultaneously, determine the desired tread depth (run). A standard tread depth of 10 inches is chosen for this staircase. These two dimensions (7 7/16" rise and 10" tread) will be used to mark the stringers.
Goal: Divide the total rise by the number of risers to find the exact height of each individual riser. Select a suitable tread depth (run).
What's used
Tools
- Construction Calculator
- Marker
About the full video
This video provides a detailed guide on how to calculate, mark, and cut stair stringers using mathematical calculations and gang-cutting techniques. It emphasizes the importance of precise measurements for total rise, individual riser height, and tread depth, adjusting for flooring and tread/riser material thickness. The video also highlights the advantages of using LVL (Laminated Veneer Lumber) over traditional lumber for consistency and durability in stair construction.
What's said in this clip
And that is from the top of the floor down to here. So, we're going to divide that by 16. I think it was 119. Yeah. 119 and 38. Always double check yourself twice. So 119 and 3/8 divided by 16 is a 7 and 7/16 riser riser. And we're going to go with a 10-in tread. I have to figure out where my two landings are. So if I look at this guy
Automatically transcribed from the source video.
Step 3 of 6: Calculate Riser and Tread Dimensions
Now that you have the exact number of risers and treads, calculate the precise height for each riser and the depth for each tread. Divide the total rise by the number of risers to get the exact riser height. For example, if your total rise is 108 inches and you've decided on 15 risers, each riser will be 108 / 15 = 7.2 inches. To determine the tread depth (also known as going), divide the total run by the number of treads. Ensure that the tread depth meets local building code requirements, which typically range from 9 to 10 inches for comfortable use. The sum of one riser height and one tread depth should ideally be between 17 and 18 inches for comfortable walking.
Every video in How to Lay Out a Stair Stringer with a Framing Square
Step 1: Determine Total Rise and Run
- 0:15–0:29 Measure Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Risers and Treads
- 2:59–6:51 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers
- 8:59–9:54 Calculate Number of Risers and Treads
Step 3: Calculate Riser and Tread Dimensions
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth (this video)
- 0:29–1:07 Calculate Rise and Run
- 3:02–4:45 Calculate Rise and Run Dimensions
Step 4: Mark the Stair Stringer with a Framing Square
- 2:53–7:59 Mark the Stringers and Adjust for Treads
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 6:59–9:34 Mark the Stair Stringer for Cutting
Step 5: Mark the Nosing and Final Cut
- 3:45–4:47 Correct Straight Stringer Layout
- 8:10–9:35 Mark Top and Bottom Stringer Cuts
- 3:10–3:59 Mark the Stringer Board
Step 6: Cut the Stair Stringer
- 0:42–0:53 Cut the Stringers
- 15:12–19:27 Cutting the Stair Stringer
- 2:42–3:34 Cut Stair Stringers
Questions about How to Lay Out a Stair Stringer with a Framing Square
What is the most critical tool for ensuring accurate stair stringer layout?
The framing square, especially when used with stair gauges, is indispensable for consistently marking the rise and run on the stringer. A construction calculator is also highly recommended to minimize mathematical errors and ensure precise measurements.
How important is accuracy when marking a stair stringer, and what are the safety implications?
Accuracy is paramount for safety; even small errors can lead to uneven steps, creating a significant tripping hazard. Double-check all measurements and markings before cutting, as consistent riser heights and tread depths are crucial to prevent falls.
Can I use different materials for stair stringers, or is pressure-treated pine always necessary?
While pressure-treated pine is excellent for outdoor use or areas prone to moisture, untreated lumber like Douglas fir or Southern Yellow Pine can be used for indoor stairs. Always select straight, knot-free lumber of appropriate dimensions that meets local building codes for structural integrity.
What's a common mistake beginners make when laying out stringers, and how can I avoid it?
A frequent error is forgetting to account for the thickness of the treads and the necessary bottom cut for the finished floor. Ensure you deduct the tread thickness from the bottom riser and factor in the nosing overhang for consistent steps from top to bottom.
How can I double-check my calculations for rise and run before I start cutting?
After calculating your total rise and run, you can dry-fit a piece of plywood or cardboard marked with your proposed dimensions to simulate a step and verify the feel. Additionally, always confirm that your individual rise and run measurements comply with local building codes, which specify minimums and maximums.
What if I don't have a specialized construction calculator? Can I still do this project?
Yes, you can perform the calculations manually using basic arithmetic, though it will require extreme care and double-checking to prevent errors. Many free online stair calculator tools are also available that can assist in determining the correct rise and run for your stairs.
Is laying out stair stringers truly a 'beginner' level project, or does it require some prior woodworking experience?
While the conceptual layout process is beginner-friendly, achieving perfect accuracy and making precise cuts requires patience and attention to detail. If you're new to using a circular saw, practice cutting straight lines on scrap wood before attempting cuts on your final stringers.
How to Lay Out a Stair Stringer with a Framing Square
This project outlines the process of accurately marking and laying out a stair stringer using a framing square, a crucial step for ensuring safe and correctly proportioned stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

