Calculate Number of Risers
From How to Lay Out a Stair Stringer with a Framing Square · Step 2 of 6 · Video by stairbuilding

Showing 0:32–0:54 of the source video. Watch the full video with every moment.
What happens in this clip
To calculate the number of risers, divide your 'total rise' measurement by a comfortable and code-compliant 'unit rise' (the height of a single step). Standard building codes often suggest a maximum unit rise of about 7.75 inches, but a comfortable height is usually around 7.5 inches. In the video's example, with a total rise of 60 inches, dividing by 7.5 inches (60 / 7.5) yields 8 risers.
Goal: Determine the number of individual risers needed for the stairs by dividing the total rise by an appropriate unit rise (individual step height).
What's used
Tools
- Calculator
About the full video
This video provides step-by-step instructions for accurately laying out deck stair stringers by calculating the total rise, determining the number of risers and treads, and then calculating the total run to find the precise landing point for the stairs. This method helps avoid common mistakes in stair construction.
Step 2 of 6: Calculate Number of Risers and Treads
To calculate the number of risers, divide the total rise by your desired riser height. A common and comfortable riser height is between 7 and 7.5 inches. For example, if your total rise is 108 inches, and you aim for a 7-inch riser, you would divide 108 by 7, resulting in approximately 15.4 risers. You must round this to a whole number, either 15 or 16. It's often best to adjust the riser height slightly to achieve a whole number of risers. The number of treads will be one less than the number of risers. For instance, if you have 15 risers, you will have 14 treads.
Every video in How to Lay Out a Stair Stringer with a Framing Square
Step 1: Determine Total Rise and Run
- 0:15–0:29 Measure Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Risers and Treads
- 2:59–6:51 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers (this video)
- 8:59–9:54 Calculate Number of Risers and Treads
Step 3: Calculate Riser and Tread Dimensions
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 0:29–1:07 Calculate Rise and Run
- 3:02–4:45 Calculate Rise and Run Dimensions
Step 4: Mark the Stair Stringer with a Framing Square
- 2:53–7:59 Mark the Stringers and Adjust for Treads
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 6:59–9:34 Mark the Stair Stringer for Cutting
Step 5: Mark the Nosing and Final Cut
- 3:45–4:47 Correct Straight Stringer Layout
- 8:10–9:35 Mark Top and Bottom Stringer Cuts
- 3:10–3:59 Mark the Stringer Board
Step 6: Cut the Stair Stringer
- 0:42–0:53 Cut the Stringers
- 15:12–19:27 Cutting the Stair Stringer
- 2:42–3:34 Cut Stair Stringers
How to Lay Out a Stair Stringer with a Framing Square
This project outlines the process of accurately marking and laying out a stair stringer using a framing square, a crucial step for ensuring safe and correctly proportioned stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

