powered by
Clip 1/3
Helpful?

Step 2 · Connect Controller to Power Supply

Identify the power input connector on the LED controller. This is usually a barrel jack or a pair of screw terminals labeled 'DC IN', '+/-', or similar. Locate the output connector from your power supply. This might be a barrel plug or bare wires. Connect the power supply's output to the controller's input. If using a barrel plug, ensure it matches the controller's jack size and that the center pin is positive (+) and the outer sleeve is negative (-), or vice-versa, as specified by the controller. If using screw terminals or bare wires, connect the positive (+) wire from the power supply to the positive (+) terminal on the controller and the negative (-) wire to the negative (-) terminal. Double-check the voltage rating of both the power supply and the controller to ensure they are compatible (e.g., both 12V or both 24V).

Tools and Materials

GE Universal 3.5mm Audio Adapter, Car Cassette to Headphone Jack in Black 34496 CityPost 32 ft. Deck Cable Railing, 42 in. Face Mount, Black GENEVERSE 1002W Continuous/2000W Peak Output HomePower ONE Backup Battery Power Station for Homes-Emergency Power Supply
Connect Controller to Power Supply · How to Connect LED Light Strips to a Controller and Power Supply · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.