Trim Ladder Legs to Length
From How to Trim Attic Ladder Legs to the Right Length · Step 3 of 4 · Video by Flannel Guy DIY

Showing 10:35–12:30 of the source video. Watch the full video with every moment.
What happens in this clip
Using the manufacturer's provided chart, the presenter determines the precise amount to cut off the bottom of the ladder legs (14 inches for his specific ceiling height). He marks the cut lines on the aluminum ladder rails using a tape measure and a marker, then uses a hacksaw to carefully cut both legs. This ensures the ladder rests on the floor at the correct angle when fully extended.
Goal: Adjust the ladder's length for proper fit and angle.
What's used
Tools
- Hacksaw
- Marker
- Tape Measure
About the full video
This project guides you through replacing an old, unsafe wooden attic ladder with a new, insulated aluminum model. The process involves assessing the existing opening, making necessary framing adjustments, safely hoisting and temporarily securing the new ladder, precisely trimming its length, and permanently installing it to improve attic access and enhance energy efficiency with its insulated hatch.
Step 3 of 4: Cut Attic Ladder Legs
Using a suitable saw, carefully cut along the marked lines on each attic ladder leg. Make sure the cuts are straight and smooth to ensure a proper fit. Remove any excess material.
Every video in How to Trim Attic Ladder Legs to the Right Length
Step 1: Measure Ladder Leg Length
- 0:00–0:36 Assess and Measure Required Cut Length
- 7:46–8:35 Trim the Ladder to Length
- 0:21–1:52 Measure the Attic Opening and Ceiling Height
Step 2: Mark Cutting Lines on Ladder Legs
- 10:35–12:30 Trim Ladder Legs to Length
- 11:00–13:10 Trim Ladder Legs to Proper Length
- 6:26–7:41 Adjust and Cut Ladder Length
Step 3: Cut Attic Ladder Legs
- 6:06–6:39 Cut the Ladder Feet
- 10:35–12:30 Trim Ladder Legs to Length (this video)
- 0:48–0:54 Cut and Reattach Second Ladder Leg
Step 4: Test Fit the Ladder Legs
- 4:28–5:38 Final Adjustments and Ladder Sizing
- 6:06–6:39 Cut the Ladder Feet
- 0:48–0:54 Cut and Reattach Second Ladder Leg
How to Trim Attic Ladder Legs to the Right Length
This project outlines the process of trimming attic ladder legs to ensure a proper fit and secure installation. It involves measuring, marking, cutting, and testing the ladder legs for the correct length.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

