powered by

Cut and Reattach Second Ladder Leg

From How to Trim Attic Ladder Legs to the Right Length · Step 4 of 4 · Video by The Excellent Laborer

Showing 0:48–0:54 of the source video. Watch the full video with every moment.

What happens in this clip

Once the first leg is cut and its foot reattached, repeat the exact same process for the second leg of the attic ladder. Measure and mark the same length to ensure both legs are identical. Use the reciprocating saw to make the cut, remove the excess, and then reattach the second rubber ladder foot using the drill and screws. After both legs are shortened and the feet are secured, test the ladder by fully extending it to ensure it is stable and sits flush on the floor, indicating a successful length adjustment.

Goal: Shorten the remaining ladder leg to match the first and ensure overall stability.

What's used

Tools

  • Attic Ladder Werner
  • Drill Ridgid
  • Ladder Foot Werner
  • Reciprocating Saw Ridgid
  • Angle grinder with a metal cutting wheel
  • Safety Glasses
  • Safety Gloves

Materials

  • Screws

About the full video

This project details how to adjust the length of an attic ladder that is too long for its opening. It involves precisely measuring the required length from the attic floor to the ground, cutting the bottom sections of the ladder's rails to size using a reciprocating saw, and then reattaching the rubber feet for stability, ensuring the ladder functions correctly and safely.

What's said in this clip

from this point down. I'm going to lift up the bottom leg here. They're going to sit right back down onto the floor. Now just do the same to the other leg. All right, now we're nice and stable.

Automatically transcribed from the source video.

Step 4 of 4: Test Fit the Ladder Legs

Carefully place the attic ladder back into its installed position in the attic opening. Check that the legs now fit the measured height correctly and that the ladder sits level and stable on the floor. Make any minor adjustments if needed.

Open this step in the guide

Every video in How to Trim Attic Ladder Legs to the Right Length

  1. Step 1: Measure Ladder Leg Length

  2. Step 2: Mark Cutting Lines on Ladder Legs

  3. Step 3: Cut Attic Ladder Legs

  4. Step 4: Test Fit the Ladder Legs

How to Trim Attic Ladder Legs to the Right Length

This project outlines the process of trimming attic ladder legs to ensure a proper fit and secure installation. It involves measuring, marking, cutting, and testing the ladder legs for the correct length.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Cut and Reattach Second Ladder Leg — How to Trim Attic Ladder Legs to the Right Length | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.