Measure the Attic Opening and Ceiling Height
From How to Trim Attic Ladder Legs to the Right Length · Step 1 of 4 · Video by The Excellent Laborer

Showing 0:21–1:52 of the source video. Watch the full video with every moment.
What happens in this clip
The first step is to determine the correct opening size for the attic ladder. Measure the width of the existing opening, specifically between the trusses. In this video, the opening measured 22.5 inches. This width is crucial as most trusses are set 24 inches on center, providing a standard 22.5 inches between them. Next, measure the length of the opening, which was 63 inches in this case. Finally, measure the distance from the ceiling to the floor (ceiling height). This measurement will dictate the required length of the attic ladder, as ladders come in various lengths to accommodate different ceiling heights (e.g., 54" L x 22.5" W for 8-9' ceilings, 63" L x 22.5" W for 10-12' ceilings). This particular installation is for a ceiling over 10 feet high, requiring a longer ladder that can extend up to 12 feet.
Goal: Begin by accurately measuring the existing or planned attic opening to determine the required ladder dimensions, focusing on width between trusses and the ceiling-to-floor height.
What's used
Tools
- Tape Measure
About the full video
This project provides a detailed step-by-step guide on how to install an attic ladder, including measuring the opening, preparing the attic frame, installing the ladder with a helper or lift, trimming the ladder to fit ceiling height, attaching feet, and adding finishing trim. It emphasizes safety and proper measurement for a functional outcome.
Step 1 of 4: Measure Ladder Leg Length
Open the attic ladder and place it in its final position. Measure the distance from the floor to the bottom edge of the attic opening. This measurement will be the target length for your ladder legs.
Every video in How to Trim Attic Ladder Legs to the Right Length
Step 1: Measure Ladder Leg Length
- 0:00–0:36 Assess and Measure Required Cut Length
- 7:46–8:35 Trim the Ladder to Length
- 0:21–1:52 Measure the Attic Opening and Ceiling Height (this video)
Step 2: Mark Cutting Lines on Ladder Legs
- 10:35–12:30 Trim Ladder Legs to Length
- 11:00–13:10 Trim Ladder Legs to Proper Length
- 6:26–7:41 Adjust and Cut Ladder Length
Step 3: Cut Attic Ladder Legs
- 6:06–6:39 Cut the Ladder Feet
- 10:35–12:30 Trim Ladder Legs to Length
- 0:48–0:54 Cut and Reattach Second Ladder Leg
Step 4: Test Fit the Ladder Legs
- 4:28–5:38 Final Adjustments and Ladder Sizing
- 6:06–6:39 Cut the Ladder Feet
- 0:48–0:54 Cut and Reattach Second Ladder Leg
How to Trim Attic Ladder Legs to the Right Length
This project outlines the process of trimming attic ladder legs to ensure a proper fit and secure installation. It involves measuring, marking, cutting, and testing the ladder legs for the correct length.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

