Cut the Ladder Feet
From How to Trim Attic Ladder Legs to the Right Length · Step 3 of 4 · Video by Bunnings Warehouse

Showing 6:06–6:39 of the source video. Watch the full video with every moment.
What happens in this clip
Once both sides of the attic ladder frame are securely mounted, it's essential to adjust the length of the ladder feet so they sit flush with the floor. Fully extend the ladder downwards until it reaches the ground. Using a tape measure, carefully determine the exact distance from the bottom rung of the ladder to the floor. This measurement indicates the excess material that needs to be cut off the bottom of the ladder's rails. Transfer this precise measurement to the ladder's metal rails, marking the cut line. With a hacksaw, carefully cut along these marked lines to remove the excess material. Throughout this process, ensure you wear appropriate safety gear, including gloves to protect your hands, safety goggles to shield your eyes from metal shavings, and ear protection from the sawing noise.
Goal: Cut the attic ladder to the correct length so it sits flush on the ground.
What's used
Tools
- Attic ladder Unspecified
- Gloves Unspecified
- Hacksaw Unspecified
- Hearing protection Unspecified
- Pencil Staedtler
- Safety goggles Unspecified
- Saw horses Unspecified
- ensuring stability.
- Tape measure Lufkin 8m
About the full video
This project guides you through the process of framing and installing an attic ladder. It covers measuring and marking the ceiling opening, cutting out plasterboard and existing joists, constructing new timber framing (noggins), temporarily securing the ladder, permanently fixing it in place, cutting the ladder feet to the correct length, and performing final checks to ensure proper operation and squareness.
Step 3 of 4: Cut Attic Ladder Legs
Using a suitable saw, carefully cut along the marked lines on each attic ladder leg. Make sure the cuts are straight and smooth to ensure a proper fit. Remove any excess material.
Every video in How to Trim Attic Ladder Legs to the Right Length
Step 1: Measure Ladder Leg Length
- 0:00–0:36 Assess and Measure Required Cut Length
- 7:46–8:35 Trim the Ladder to Length
- 0:21–1:52 Measure the Attic Opening and Ceiling Height
Step 2: Mark Cutting Lines on Ladder Legs
- 10:35–12:30 Trim Ladder Legs to Length
- 11:00–13:10 Trim Ladder Legs to Proper Length
- 6:26–7:41 Adjust and Cut Ladder Length
Step 3: Cut Attic Ladder Legs
- 6:06–6:39 Cut the Ladder Feet (this video)
- 10:35–12:30 Trim Ladder Legs to Length
- 0:48–0:54 Cut and Reattach Second Ladder Leg
Step 4: Test Fit the Ladder Legs
- 4:28–5:38 Final Adjustments and Ladder Sizing
- 6:06–6:39 Cut the Ladder Feet
- 0:48–0:54 Cut and Reattach Second Ladder Leg
How to Trim Attic Ladder Legs to the Right Length
This project outlines the process of trimming attic ladder legs to ensure a proper fit and secure installation. It involves measuring, marking, cutting, and testing the ladder legs for the correct length.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

