Assess and Measure Required Cut Length
From How to Trim Attic Ladder Legs to the Right Length · Step 1 of 4 · Video by The Excellent Laborer

Showing 0:00–0:36 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by observing the attic ladder extended from its opening. If it's too long, it will not sit properly on the floor or fold away correctly. Fully extend the ladder to its intended position, ensuring it rests at the correct angle against the ceiling opening. Using a tape measure, carefully measure the distance from the bottom of the ladder's rail, at the point where it would contact the floor, up to the desired cut-off point. The video indicates a measurement of approximately 36.5 inches from the floor for the section to be removed.
Goal: Accurately determine the amount of ladder to be removed for proper fit.
What's used
Tools
- Attic Ladder Werner
- Tape Measure
About the full video
This project details how to adjust the length of an attic ladder that is too long for its opening. It involves precisely measuring the required length from the attic floor to the ground, cutting the bottom sections of the ladder's rails to size using a reciprocating saw, and then reattaching the rubber feet for stability, ensuring the ladder functions correctly and safely.
What's said in this clip
As you can see, the ladder is too long and needs trim down. So I'm going to trim this down. I'm going to flip the ladder back on itself and then we're going to fully extend it down and we're going to get that measurement from the bottom of this ladder to the floor at this slope in order to give us our measurement to cut this section down to. If I extend my tape down at the same slope right to the floor, if I cut this to about 36 and a half inches looks about right. So I need to cut this section 36 and a half inches from this point down.
Automatically transcribed from the source video.
Step 1 of 4: Measure Ladder Leg Length
Open the attic ladder and place it in its final position. Measure the distance from the floor to the bottom edge of the attic opening. This measurement will be the target length for your ladder legs.
Every video in How to Trim Attic Ladder Legs to the Right Length
Step 1: Measure Ladder Leg Length
- 0:00–0:36 Assess and Measure Required Cut Length (this video)
- 7:46–8:35 Trim the Ladder to Length
- 0:21–1:52 Measure the Attic Opening and Ceiling Height
Step 2: Mark Cutting Lines on Ladder Legs
- 10:35–12:30 Trim Ladder Legs to Length
- 11:00–13:10 Trim Ladder Legs to Proper Length
- 6:26–7:41 Adjust and Cut Ladder Length
Step 3: Cut Attic Ladder Legs
- 6:06–6:39 Cut the Ladder Feet
- 10:35–12:30 Trim Ladder Legs to Length
- 0:48–0:54 Cut and Reattach Second Ladder Leg
Step 4: Test Fit the Ladder Legs
- 4:28–5:38 Final Adjustments and Ladder Sizing
- 6:06–6:39 Cut the Ladder Feet
- 0:48–0:54 Cut and Reattach Second Ladder Leg
How to Trim Attic Ladder Legs to the Right Length
This project outlines the process of trimming attic ladder legs to ensure a proper fit and secure installation. It involves measuring, marking, cutting, and testing the ladder legs for the correct length.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

