Secure Treads to Stairs

What happens in this clip

To install the prepared carpet tread, first ensure your alignment is correct. You can use a laser level to project a straight line from the wall across the stair, or simply use a tape measure to ensure consistent spacing from the wall for each tread. Once aligned, carefully place the tread onto the stair, ensuring the adhesive side makes contact with the hardwood. Apply firm pressure across the entire surface of the tread, using your feet or a specialized roller tool, to ensure the double-sided tape adheres completely and securely to the stair.

Goal: Securely attach each carpet tread to the hardwood stair.

What's used

Tools

• Carpet Treads (with tape applied) Canyon
• Laser Level
• Chalk line
• Roller Tool
• Tape Measure

About the full video

This project provides a step-by-step guide on how to install carpet treads on hardwood stairs using double-sided carpet tape. The process involves preparing the treads, accurately positioning them, and securing them to enhance safety and aesthetics without requiring advanced tools or skills.

Step 3 of 8: Position and Align First Tread

Take one carpet tread and align its edges with the pencil marks made in Step 1. For spiral stairs, ensure the tread follows the curve of the step and that the front edge is parallel to the riser or the nose of the step. Double-check the alignment from multiple angles.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs (this video)
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection