Measure and Mark Stair Tread Placement

What happens in this clip

To ensure consistent and straight placement of the carpet treads, measure the desired distance from the edge of the stairs. Then, use blue painter's tape to create parallel guide lines up the entire staircase. This helps in visually aligning each tread.

Goal: Create guides for even tread application

What's used

Tools

• Tape Measure
• Yardstick

Materials

• Blue Painter's Tape

About the full video

This project involves installing peel-and-stick carpet stair treads on wooden stairs to improve safety, comfort, and aesthetics. The process includes unboxing the treads, measuring and marking the stairs for consistent placement, and then applying each tread.

Step 1 of 8: Measure and Mark Tread Placement

Carefully measure the width and depth of each stair tread. Use a measuring tape and a pencil to mark the exact position where each carpet tread will be laid. For spiral staircases, pay close attention to the curvature and ensure the marks accommodate the tread's shape. This step is critical for a professional and safe installation.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement (this video)
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection