Inspect and Finish Installation

What happens in this clip

Visually inspect the installed vinyl stair tread to ensure it is perfectly aligned, securely adhered, and free of any gaps or lifted edges. Repeat the process for all remaining stair treads to complete the staircase. Allow adequate time for the adhesive to fully cure according to the manufacturer's instructions before putting the stairs into regular use. The finished result showcases a durable and aesthetically pleasing staircase.

Goal: After installation, inspect the newly installed vinyl stair tread for proper placement and adhesion, ensuring a professional and durable finish.

About the full video

This video showcases the installation of custom-made solid vinyl stair treads using an adhesive method. The installer highlights the durability and aesthetic appeal of vinyl as a superior alternative to traditional wood for staircases, demonstrating the application of construction adhesive and hot glue before precisely placing the vinyl tread.

Step 8 of 8: Inspect and Clean Up

Once all treads are installed, walk the staircase and check each tread. Ensure there are no loose edges, bubbles, or gaps. Wipe away any excess adhesive that may have squeezed out. Dispose of any scrap materials and ensure the staircase is clear of tools and debris.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation (this video)
   • 0:13–0:17 Complete Installation and Final Inspection