Complete Installation and Final Inspection

What happens in this clip

Repeat the placement and pressing process for all remaining carpet stair treads, moving systematically up or down the staircase. Ensure each tread is aligned consistently with the previous one, maintaining even spacing and straightness. After all treads are installed, perform a final inspection. Visually check for any misalignments or loose edges. Walk up and down the stairs to confirm that each tread feels firmly secured and does not shift underfoot, ensuring both safety and a polished aesthetic for your newly enhanced staircase.

Goal: Install all remaining treads and verify secure placement and aesthetic appeal.

What's used

Tools

• Carpet Stair Treads Oak Valley Designs

About the full video

This project provides a step-by-step guide on how to easily install pre-made carpet stair treads onto an existing wooden staircase. The process involves preparing the stair surface, carefully placing each tread, and securing them with their integrated non-slip backing to enhance safety, reduce noise, and protect the original stair finish.

Step 8 of 8: Inspect and Clean Up

Once all treads are installed, walk the staircase and check each tread. Ensure there are no loose edges, bubbles, or gaps. Wipe away any excess adhesive that may have squeezed out. Dispose of any scrap materials and ensure the staircase is clear of tools and debris.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection (this video)