Install First Stair Tread

What happens in this clip

Begin installation by peeling off the clear plastic liner from the back of the first carpet stair tread to expose the pressure-sensitive adhesive. Carefully align the rounded front edge of the tread with the front edge of your stair step. Ensure it is centered and snug against the step riser. Once positioned, firmly press down on the entire surface of the tread with your hands to activate the adhesive and secure it in place. The presenter demonstrates that if alignment isn't perfect, the tread can be peeled off and repositioned without damaging the wooden stairs.

Goal: Securely attach the first carpet stair tread

What's used

Tools

• Oak Valley Designs Bullnose Carpet Stair Tread Oak Valley Designs

About the full video

This project demonstrates the straightforward installation of Oak Valley Designs' Bullnose Carpet Stair Treads and a matching Landing Pad. The video highlights the product's features, including a reinforced front edge, built-in padding, and pressure-sensitive adhesive, which allows for easy, repositionable, and non-damaging application to wooden stairs, enhancing safety and aesthetics.

Step 5 of 8: Press Carpet Tread into Place

Once positioned and adhesive is applied (if necessary), press the carpet tread down firmly onto the stair tread. Start from the center and smooth your hands outwards towards the edges. Pay special attention to the edges and corners to ensure they are well-adhered. For spiral stairs, ensure the tread conforms smoothly to the curve.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread (this video)
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection