Press Down Firmly

What happens in this clip

With both adhesive strips removed and the tread positioned, use your hands to firmly press down across the entire surface of the carpet stair tread. Apply consistent pressure to ensure that the entire adhesive backing makes strong contact with the wooden stair surface. This will securely fasten the tread in place, preventing shifting and providing a non-slip surface.

Goal: Ensure strong and complete adhesion of the stair tread

What's used

Materials

• Self-adhesive Carpet Stair Tread

About the full video

This project demonstrates how to easily install self-adhesive carpet stair treads onto wooden stairs. The process involves peeling off the protective backing from the adhesive strips, carefully positioning the tread on the stair, and then pressing it firmly to ensure secure attachment.

Step 5 of 8: Press Carpet Tread into Place

Once positioned and adhesive is applied (if necessary), press the carpet tread down firmly onto the stair tread. Start from the center and smooth your hands outwards towards the edges. Pay special attention to the edges and corners to ensure they are well-adhered. For spiral stairs, ensure the tread conforms smoothly to the curve.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly (this video)

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection