Lay and Secure Carpet Sections (Repetitive)

What happens in this clip

Starting from the bottom step, carefully position the pre-cut carpet section for the first riser onto the adhesive-coated surface, pressing it firmly. Then, lay the carpet section for the tread, ensuring it overhangs the front edge (nosing) slightly and aligns neatly with the riser carpet. Use a staple gun to secure the edges of the carpet, especially along the bottom of the risers, under the nosing, and where the tread meets the riser. A carpet tucker (also known as a stair tool) or a rubber mallet can be used to push the carpet firmly into the corners and along the edges, ensuring a tight fit and a crisp, clean seam. Continue this process for each step, working your way up the staircase.

Goal: Secure the carpet onto the stair treads and risers

What's used

Tools

• Carpet Tucker / Stair Tool
• Rubber Mallet
• Staple Gun (Electric/Pneumatic)

Materials

• Carpet (pre-cut sections)
• Staples

About the full video

This project provides a detailed guide on how to install carpet on wooden stairs, covering essential steps from precise measurement and carpet cutting to adhesive application, careful laying, and securing the carpet with staples and trimming for a professional finish. It demonstrates techniques for handling various stair shapes and ensuring a durable and aesthetically pleasing result.

Step 6 of 8: Secure Edges (if applicable)

Some carpet treads come with integrated loops, ties, or require small staples or adhesive strips along the edges for extra security. Follow the manufacturer's specific instructions for securing the edges. For spiral staircases, ensure these edge attachments do not create a tripping hazard.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive) (this video)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection