Install Remaining Stair Treads

What happens in this clip

Repeat the cleaning, marking (if necessary), and installation process for each remaining stair. Use the template or marks created earlier to maintain consistency in placement. Peel the backing, align, and firmly press each tread into place until all stairs have been covered.

Goal: Apply all remaining stair treads consistently and securely.

What's used

Materials

• Stair Treads Oak Fairy Designs

About the full video

This project guides you through installing carpeted stair treads to enhance safety and prevent slips on hardwood stairs, particularly when there are young children or pets in the home. The process involves thorough cleaning of the stairs, precise measurement and marking for consistent tread placement, and secure application of the adhesive-backed treads.

Step 7 of 8: Repeat for Remaining Treads

Systematically repeat Steps 1 through 6 for each subsequent stair tread. Ensure consistent alignment and pressure application on each step. Work your way up the spiral staircase, maintaining the same level of care and precision for each tread installation.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads (this video)

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection