Secure Carpet with Staples

What happens in this clip

Using a power stapler, secure the carpet firmly along the back of the stair tread, directly into the wood. Then, bring the carpet down the riser and secure it along the bottom edge, where it meets the next tread. Ensure staples are placed close together for a strong hold and are not visible or catch on feet. A stair tool can be used to neatly tuck the carpet into the corner formed by the tread and riser before stapling.

Goal: Permanently fasten the carpet to the stair treads and risers.

What's used

Tools

• Power Stapler
• Pneumatic stapler (requires air compressor)
• Safety Glasses
• Stair Tool (Tucking Tool)

Materials

• Stair Carpet Piece
• Staples

About the full video

This project provides a detailed guide on how to professionally install carpet on a staircase, specifically demonstrating the intricate process of fitting carpet around balusters on a turning stair. It covers cutting the carpet to fit the shape of the stairs and individual balusters, securing it firmly with a power stapler, tucking edges with a stair tool, and finishing intricate areas with a utility knife and hot glue.

Step 6 of 8: Secure Edges (if applicable)

Some carpet treads come with integrated loops, ties, or require small staples or adhesive strips along the edges for extra security. Follow the manufacturer's specific instructions for securing the edges. For spiral staircases, ensure these edge attachments do not create a tripping hazard.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples (this video)
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection