Secure the First Section with Staples

What happens in this clip

With the first runner section centered, begin securing it. First, staple the carpet to the bottom edge of the riser, into the wooden floor, ensuring it's taut. Next, press the carpet firmly into the crease between the riser and the tread. Use the Dual Fast staple gun to insert multiple staples along this crease, ensuring a strong hold. The narrator recommends placing approximately 5-7 staples across the width for ample security. After stapling, use the carpet tucker to push the carpet firmly into the crease, creating a sharp, clean bend. Use scissors to trim any loose fibers for a neat appearance.

Goal: Firmly attach the initial carpet runner section to the first stair tread and riser.

What's used

Tools

• Carpet Tucker
• Dual Fast Electric Staple Gun Dual Fast
• Scissors
• Staples Accu-Fast

About the full video

This project provides a comprehensive guide on how to install a carpet stair runner using a pressure-fit stapling method, bypassing the use of traditional smooth edge (tack strips). The process involves precise centering, stretching the carpet with a knee kicker, and securely stapling it to the treads and risers for a tight, durable, and toe-friendly finish. The video also covers tool preparation and trimming the top section for a seamless appearance.

Step 7 of 8: Secure Edges and Trim

Ensure the edges of each carpet tread are pressed down firmly and adhered properly. If using a product that requires additional fastening, such as carpet staples or a tack strip along the riser, install them now. Carefully trim any minor excess carpet material that may be visible around the edges with a sharp utility knife for a neat and professional appearance.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples (this video)

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup