Install Carpet Treads with Adhesive

What happens in this clip

Take a carpet tread from its box. The easiest and most rewarding part is installation. First, peel off the protective backing from the adhesive strip on the back of the tread. Position the carpet tread by hooking its bullnose (the front edge) underneath the bottom edge of the stair tread. Then, gently pull back on the tread with one hand to ensure it's nice and tight against the bullnose. Once taut, press firmly across the entire surface of the tread, ensuring it adheres securely. Use the painter's tape as a guide to maintain perfect alignment, ensuring everything is straight.

Goal: Peel off the protective backing from the carpet tread, hook it under the bullnose of the stair, and then firmly press and align it using the painter's tape guide.

What's used

Tools

• Carpet treads

About the full video

This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.

Step 6 of 8: Attach Carpet Tread to Stair

Align the carpet tread with the stair tread, starting from the back or the nose of the stair and working your way down. Press the carpet firmly into the adhesive, smoothing out any wrinkles or air bubbles. For curved stairs, pay extra attention to ensuring the carpet conforms to the curve and is securely adhered along its entire surface, particularly at the edges and any tight curves. Use a seam roller or your hands to ensure maximum contact.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive (this video)

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup