Cut Carpet Pieces

What happens in this clip

Using a sharp utility knife and a T-square or long straight edge, carefully cut the carpet pieces along the marked lines. Ensure your cuts are precise and clean. For the connecting edges between steps, a perfectly straight cut is essential for seamless joins. For other edges, maintain the extra inch of material you marked earlier. The presenter demonstrates cutting the carpet pieces, emphasizing the importance of accuracy for a professional finish.

What's used

Tools

• Carpet Material (Cut)
• T-Square Johnson Level & Tool
• Straight edge
• Utility Knife

About the full video

This project provides verbose, step-by-step instructions on how to accurately create paper templates for winder stairs, transfer those templates to carpet material, cut the carpet pieces, and then securely install the carpet runner using tack strips and staples. It emphasizes precision in measuring and cutting for a neat and safe finish on complex stair designs.

Step 3 of 8: Cut Carpet Treads from Templates

Unroll the carpet tread material and position your templates onto the back of the carpet. Carefully align each template with the carpet's backing and use a marker to trace the outline. Ensure that the grain or pattern of the carpet, if any, is oriented consistently across all treads. Using a sharp utility knife or heavy-duty scissors, cut precisely along the traced lines, following the curves and angles of the template.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces (this video)
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup