Clean the Stairs

What happens in this clip

Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.

Goal: Prepare the stair surface for tread installation.

What's used

Tools

• Vacuum Cleaner
• Broom and dustpan

About the full video

This project guides you through installing carpeted stair treads to enhance safety and prevent slips on hardwood stairs, particularly when there are young children or pets in the home. The process involves thorough cleaning of the stairs, precise measurement and marking for consistent tread placement, and secure application of the adhesive-backed treads.

Step 4 of 8: Prepare Stair Surface

Vacuum each stair tread to remove all loose dirt, dust, and debris. If there is any old adhesive or residue, use a scraper and an appropriate adhesive remover to clean the surface completely. For wood stairs, ensure the surface is smooth and free of splinters. If necessary, lightly sand any rough areas. The surface must be clean, dry, and smooth for proper adhesion.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs (this video)
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup