Apply Spray Adhesive

What happens in this clip

Once the carpet is pulled back, take a can of spray adhesive and apply it evenly across the entire surface of the stair tread. This adhesive will help bond the carpet more securely to the step.

Goal: With the carpet pulled back, apply a generous and even layer of spray adhesive directly onto the exposed surface of the stair tread where the carpet will be re-secured. This provides additional grip and stability.

What's used

Tools

• SprayWise Spray Adhesive

About the full video

This project demonstrates how to quickly and effectively re-secure loose carpet on a stair tread using spray adhesive and a carpet tucking tool. The process involves lifting the carpet, applying adhesive, and then firmly re-attaching and tucking the carpet for a tight, safe finish.

Step 5 of 8: Apply Adhesive

Depending on the adhesive used (e.g., spray adhesive, carpet tape, construction adhesive), apply it according to its specific instructions. For spray adhesives, apply a light, even coat to the back of the carpet tread or the stair surface. For carpet tape, apply strips along the edges and potentially the center of the tread. For construction adhesive, use a caulk gun to apply beads. Ensure full coverage, especially along the edges, to prevent lifting.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive (this video)
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup