Install Remaining Carpet Stair Treads

What happens in this clip

Once a tread is aligned, firmly press it down to secure it in place. The video implies an adhesive backing on the treads, as no other fastening method is shown. Repeat this process for the remaining stairs: place a new carpet tread, ensure it is centered and straight by visual inspection or quick checks with the tape measure against the previous tread or stair edge, and then firmly press it down to adhere. Continue this process for all steps on the staircase until all treads are installed.

Goal: Securely install all carpet treads on the staircase

What's used

Tools

• Carpet Stair Tread
• Hands
• Tape Measure Lufkin
• Ruler

About the full video

This project demonstrates the straightforward process of installing pre-cut carpet stair treads onto a wooden staircase. It focuses on careful measurement, alignment, and secure placement of each tread to enhance both the safety and aesthetic appeal of the stairs.

Step 6 of 8: Attach Carpet Tread to Stair

Align the carpet tread with the stair tread, starting from the back or the nose of the stair and working your way down. Press the carpet firmly into the adhesive, smoothing out any wrinkles or air bubbles. For curved stairs, pay extra attention to ensuring the carpet conforms to the curve and is securely adhered along its entire surface, particularly at the edges and any tight curves. Use a seam roller or your hands to ensure maximum contact.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads (this video)
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup