Create Template for Second Winder Step

What happens in this clip

Repeat the templating process for the next winder step using a fresh piece of kraft paper. This involves aligning the paper, securing it with staples, folding it around the nosing and side edges, and cutting it to the exact shape of the step. As with the previous template, mark the runner's width, center line, and straight edges. Crucially, ensure that the measurements (e.g., 28 inches wide) for the runner remain consistent across all winder steps to maintain a uniform appearance.

What's used

Tools

• Electric Stapler
• Kraft Paper Roll
• Marker Sharpie
• Measuring Tape DeWalt
• Small Level Empire Level
• Utility Knife

About the full video

This project provides verbose, step-by-step instructions on how to accurately create paper templates for winder stairs, transfer those templates to carpet material, cut the carpet pieces, and then securely install the carpet runner using tack strips and staples. It emphasizes precision in measuring and cutting for a neat and safe finish on complex stair designs.

Step 2 of 8: Create a Template for Each Tread

For each stair tread, create a paper or cardboard template that mirrors its exact dimensions, including any curves and angles. This can be done by carefully tracing the shape of the tread onto the template material. For curved treads, it is essential to mark the different depths along the curve as well. These templates will serve as guides for cutting the carpet treads.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step (this video)

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup