Measure and Cut Carpet Pieces

What happens in this clip

Based on the stair measurements, lay out the carpet and carefully cut it into individual pieces for each tread and riser. It's often recommended to cut the carpet slightly larger than the exact dimensions to allow for adjustments and trimming. Use a metal straight edge to guide a sharp utility knife for precise, straight cuts through the carpet backing. Ensure the carpet pile direction is consistent for all stair pieces.

Goal: Prepare carpet sections for each stair tread and riser

What's used

Tools

• Carpet
• Measuring Tape Stanley
• Metal Straight Edge
• Utility Knife Roberts

About the full video

This DIY project provides a detailed guide on how to install carpet on a staircase, covering all necessary steps from preparing the stairs with tack strips and underlay to precisely cutting and securing the carpet. The process involves measuring, cutting, stapling, stretching, and tucking the carpet for a professional finish.

Step 3 of 8: Cut Carpet Treads from Templates

Unroll the carpet tread material and position your templates onto the back of the carpet. Carefully align each template with the carpet's backing and use a marker to trace the outline. Ensure that the grain or pattern of the carpet, if any, is oriented consistently across all treads. Using a sharp utility knife or heavy-duty scissors, cut precisely along the traced lines, following the curves and angles of the template.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces (this video)

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup