Measure Total Stair Height
From How to Measure Deck Stair Stringer Length · Step 1 of 6 · Video by decks.com

Showing 0:09–0:18 of the source video. Watch the full video with every moment.
What happens in this clip
The initial step in building deck stairs is to precisely measure the total vertical height from the top surface of the deck down to the desired landing area. The landing area must be a level surface, such as compacted soil, a concrete pad, or an existing deck platform. Utilize a tape measure and a level to ensure the measurement is accurate and the landing is indeed horizontal.
Goal: Determine the accurate vertical height from the deck's top to the landing.
What's used
Tools
- Level
- Tape Measure Stanley
About the full video
This project provides a comprehensive, step-by-step guide to constructing and installing deck stairs. It covers initial measurements, calculating rise and run for stringers, cutting the stringers, two methods for attaching stringers to the deck frame, and finally, installing the decking boards for treads and risers.
Step 1 of 6: Measure Total Rise
Measure the vertical distance from the finished level of the ground, patio, or lower deck to the finished level of the upper deck. This measurement is crucial for calculating the height of each individual step and ensuring the stairs meet the deck surface correctly.
Every video in How to Measure Deck Stair Stringer Length
Step 1: Measure Total Rise
- 0:17–0:31 Measure Total Rise
- 0:34–1:02 Determine Total Rise
- 0:09–0:18 Measure Total Stair Height (this video)
Step 2: Determine Riser Height
- 1:02–2:45 Calculate Riser Dimensions
- 0:51–1:37 Calculate Individual Step Rise and Total Run
- 4:32–5:10 Calculate Individual Riser Height
Step 3: Calculate Number of Treads
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 2:59–6:51 Calculate Number of Risers and Treads
Step 4: Determine Run Per Tread
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
Step 5: Calculate Diagonal Stringer Length
Step 6: Mark Stringer Lumber
- 6:12–7:01 Marking the Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 1:41–2:21 Mark Stringer Notches
How to Measure Deck Stair Stringer Length
This project outlines the process of accurately measuring and calculating the required length for deck stair stringers. It involves determining the total rise, the run of each step, and accounting for the angle of the stairs to ensure a safe and consistent tread depth and riser height. The final measurement will be used to mark and cut the stringers from lumber.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

