Determine Total Rise
From How to Measure Deck Stair Stringer Length · Step 1 of 6 · Video by Project DIY

Showing 0:34–1:02 of the source video. Watch the full video with every moment.
What happens in this clip
The first crucial step is to measure the total height from the ground (or the intended landing point) to the top of the deck or platform where the stairs will connect. The creator measures 42 inches. He advises to account for the thickness of any decking material (e.g., 1.5 inches for a 2x material or 5/4 decking) in this initial measurement if it's not already installed.
Goal: Accurately measure the total vertical height for the stairs
What's used
Tools
- Tape Measure Stanley Powerlock
About the full video
This project demonstrates an easy method for cutting stair stringers for a deck or other outdoor structure. It involves calculating the required rise and run, creating a simple wooden jig to mark the cuts accurately, and then using circular and reciprocating saws to cut the stringers. The method emphasizes using the initial stringer as a pattern to ensure consistency across multiple stringers, simplifying the process and avoiding complex mathematical calculations for each cut.
Step 1 of 6: Measure Total Rise
Measure the vertical distance from the finished level of the ground, patio, or lower deck to the finished level of the upper deck. This measurement is crucial for calculating the height of each individual step and ensuring the stairs meet the deck surface correctly.
Every video in How to Measure Deck Stair Stringer Length
Step 1: Measure Total Rise
- 0:17–0:31 Measure Total Rise
- 0:34–1:02 Determine Total Rise (this video)
- 0:09–0:18 Measure Total Stair Height
Step 2: Determine Riser Height
- 1:02–2:45 Calculate Riser Dimensions
- 0:51–1:37 Calculate Individual Step Rise and Total Run
- 4:32–5:10 Calculate Individual Riser Height
Step 3: Calculate Number of Treads
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 2:59–6:51 Calculate Number of Risers and Treads
Step 4: Determine Run Per Tread
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
Step 5: Calculate Diagonal Stringer Length
Step 6: Mark Stringer Lumber
- 6:12–7:01 Marking the Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 1:41–2:21 Mark Stringer Notches
How to Measure Deck Stair Stringer Length
This project outlines the process of accurately measuring and calculating the required length for deck stair stringers. It involves determining the total rise, the run of each step, and accounting for the angle of the stairs to ensure a safe and consistent tread depth and riser height. The final measurement will be used to mark and cut the stringers from lumber.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

