Measure Total Rise
From How to Measure Deck Stair Stringer Length · Step 1 of 6 · Video by stairbuilding

Showing 0:17–0:31 of the source video. Watch the full video with every moment.
What happens in this clip
Measure the vertical distance from the top surface of your finished deck floor straight down to the level where the stairs will terminate. This measurement is known as the 'total rise'. For the example in the video, the total rise is 60 inches.
Goal: The first step in stair stringer layout is to accurately measure the total vertical distance from the top of the finished deck floor to the ground where the stairs will land.
What's used
Tools
- Tape Measure
About the full video
This video provides step-by-step instructions for accurately laying out deck stair stringers by calculating the total rise, determining the number of risers and treads, and then calculating the total run to find the precise landing point for the stairs. This method helps avoid common mistakes in stair construction.
Step 1 of 6: Measure Total Rise
Measure the vertical distance from the finished level of the ground, patio, or lower deck to the finished level of the upper deck. This measurement is crucial for calculating the height of each individual step and ensuring the stairs meet the deck surface correctly.
Every video in How to Measure Deck Stair Stringer Length
Step 1: Measure Total Rise
- 0:17–0:31 Measure Total Rise (this video)
- 0:34–1:02 Determine Total Rise
- 0:09–0:18 Measure Total Stair Height
Step 2: Determine Riser Height
- 1:02–2:45 Calculate Riser Dimensions
- 0:51–1:37 Calculate Individual Step Rise and Total Run
- 4:32–5:10 Calculate Individual Riser Height
Step 3: Calculate Number of Treads
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 2:59–6:51 Calculate Number of Risers and Treads
Step 4: Determine Run Per Tread
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
Step 5: Calculate Diagonal Stringer Length
Step 6: Mark Stringer Lumber
- 6:12–7:01 Marking the Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 1:41–2:21 Mark Stringer Notches
How to Measure Deck Stair Stringer Length
This project outlines the process of accurately measuring and calculating the required length for deck stair stringers. It involves determining the total rise, the run of each step, and accounting for the angle of the stairs to ensure a safe and consistent tread depth and riser height. The final measurement will be used to mark and cut the stringers from lumber.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

