Marking the Stringers
From How to Measure Deck Stair Stringer Length · Step 6 of 6 · Video by Everyday Home Repairs

Showing 6:12–7:01 of the source video. Watch the full video with every moment.
What happens in this clip
With the framing square's gauges set to the desired rise (7 1/16 inches) and run (10 inches), begin marking the stringer. Place the framing square on the edge of the 2x12 board and trace the outside for each step. For the first step, instead of using the full rise, mark 5 13/16 inches for the bottom surface. This is because 1 1/4 inches will be added on top for the tread, resulting in the desired total height. The top line marked will be the back surface of the stringer. Continue to mark the outline of all subsequent steps along the board.
Goal: Accurately mark the rise and run of each step on the 2x12 board using a framing square with gauges.
What's used
Tools
- 2x12 Pressure Treated Board
- Framing Square
- Gauges
- Measuring Tape
- Pencil
About the full video
This project provides detailed, step-by-step instructions for constructing a set of wooden stairs for a deck. It covers crucial initial measurements like rise and run, preparing the deck's rim joists for stringer attachment, marking and cutting stair stringers from 2x12 pressure-treated lumber using specific tools, and finally, assembling and securing the stairs to both the deck and a landing pad.
Step 6 of 6: Mark Stringer Lumber
Take your chosen lumber (typically a 2x10 or 2x12) and use your tape measure and pencil to mark the calculated diagonal stringer length from one end. Ensure the mark is accurate and perpendicular to the edge of the board for a clean cut.
Every video in How to Measure Deck Stair Stringer Length
Step 1: Measure Total Rise
- 0:17–0:31 Measure Total Rise
- 0:34–1:02 Determine Total Rise
- 0:09–0:18 Measure Total Stair Height
Step 2: Determine Riser Height
- 1:02–2:45 Calculate Riser Dimensions
- 0:51–1:37 Calculate Individual Step Rise and Total Run
- 4:32–5:10 Calculate Individual Riser Height
Step 3: Calculate Number of Treads
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 2:59–6:51 Calculate Number of Risers and Treads
Step 4: Determine Run Per Tread
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
Step 5: Calculate Diagonal Stringer Length
Step 6: Mark Stringer Lumber
- 6:12–7:01 Marking the Stringers (this video)
- 0:57–1:08 Lay Out and Cut the First Stringer
- 1:41–2:21 Mark Stringer Notches
How to Measure Deck Stair Stringer Length
This project outlines the process of accurately measuring and calculating the required length for deck stair stringers. It involves determining the total rise, the run of each step, and accounting for the angle of the stairs to ensure a safe and consistent tread depth and riser height. The final measurement will be used to mark and cut the stringers from lumber.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

