Calculate Individual Step Rise and Total Run
From How to Measure Deck Stair Stringer Length · Step 2 of 6 · Video by Cottage Life

Showing 0:51–1:37 of the source video. Watch the full video with every moment.
What happens in this clip
After determining the total rise (e.g., 43.5 inches), calculate the individual step rise based on local building codes. The example code states a step must be between 4 7/8 inches and 7 7/8 inches. The presenter prefers a 7-inch rise. Dividing 43.5 inches by 7 inches suggests approximately 6 steps. To get an exact, even rise, divide the total rise (43.5 inches) by the whole number of steps (e.g., 6 or 7). The presenter determines 6 steps at 7-1/4 inches each will give a total rise of 43.5 inches. For the 'run' (horizontal depth of each step), a typical tread is 10 inches. With 6 steps, the total run will be 60 inches (6 steps * 10 inches/step). Verify that the ground at the 60-inch mark from the deck maintains a consistent height or adjust the final step if needed.
Goal: Determine precise individual step rise and total horizontal length (run) for the staircase.
What's used
Tools
- Pencil
- Scrap Plywood
- Notepad
- Tape Measure
About the full video
This project guides you through the process of calculating, laying out, and cutting stair stringers for a deck. It covers determining the total rise and run, calculating individual step dimensions, creating a template on scrap plywood, and then using that template to mark and cut the actual stringer material for consistent and safe stairs.
Step 2 of 6: Determine Riser Height
Divide the total rise (measured in Step 1) by a desired number of steps. A common target riser height is between 6 and 8 inches. For example, if the total rise is 48 inches, dividing by 7 steps would yield approximately 6.86 inches per riser. Adjust the number of steps to achieve a comfortable and code-compliant riser height. It's often best to have an even number of treads.
Every video in How to Measure Deck Stair Stringer Length
Step 1: Measure Total Rise
- 0:17–0:31 Measure Total Rise
- 0:34–1:02 Determine Total Rise
- 0:09–0:18 Measure Total Stair Height
Step 2: Determine Riser Height
- 1:02–2:45 Calculate Riser Dimensions
- 0:51–1:37 Calculate Individual Step Rise and Total Run (this video)
- 4:32–5:10 Calculate Individual Riser Height
Step 3: Calculate Number of Treads
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 2:59–6:51 Calculate Number of Risers and Treads
Step 4: Determine Run Per Tread
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
Step 5: Calculate Diagonal Stringer Length
Step 6: Mark Stringer Lumber
- 6:12–7:01 Marking the Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 1:41–2:21 Mark Stringer Notches
How to Measure Deck Stair Stringer Length
This project outlines the process of accurately measuring and calculating the required length for deck stair stringers. It involves determining the total rise, the run of each step, and accounting for the angle of the stairs to ensure a safe and consistent tread depth and riser height. The final measurement will be used to mark and cut the stringers from lumber.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

