Calculate Stringer Length with Rise and Run
From How to Measure Deck Stair Stringer Length · Step 5 of 6 · Video by Calculated Industries

Showing 0:20–0:39 of the source video. Watch the full video with every moment.
What happens in this clip
For the second scenario, which involves knowing both the total rise and total run, start by clearing any previous calculation on the calculator by pressing the 'On/C' button. Then, input the total rise as 10 feet 1 inch, similar to the first scenario (press '1', '0', 'Feet', '1', 'Inch', 'Rise'). Next, input the total run, which in this example is 15 feet 5 inches (press '1', '5', 'Feet', '5', 'Inch', 'Run'). After both the rise and run values are entered, toggle through the 'Stair' button. The calculator will then display the stringer length that accommodates both the specified rise and run. The example result shown is 18 feet and 3/4 inches, which is longer than the previous calculation due to the added run constraint.
Goal: Determine stair stringer length using both total rise and total run.
What's used
Tools
- Construction Master Pro Calculator Calculated Industries
- Online stair calculator
- Framing square with stair tables
About the full video
This project demonstrates how to use a Construction Master Pro calculator to efficiently determine the stair stringer length. Two distinct scenarios are covered: calculating stringer length when only the total rise is known, and calculating it when both the total rise and total run are provided, highlighting how different inputs affect the final stringer length.
Step 5 of 6: Calculate Diagonal Stringer Length
Use the Pythagorean theorem (a² + b² = c²) where 'a' is the total rise, 'b' is the total run, and 'c' is the diagonal length of the stringer. Alternatively, use a framing square's stair gauges or a stair calculator app/tool. This calculation gives you the length of the hypotenuse of the right triangle formed by the rise and run.
Every video in How to Measure Deck Stair Stringer Length
Step 1: Measure Total Rise
- 0:17–0:31 Measure Total Rise
- 0:34–1:02 Determine Total Rise
- 0:09–0:18 Measure Total Stair Height
Step 2: Determine Riser Height
- 1:02–2:45 Calculate Riser Dimensions
- 0:51–1:37 Calculate Individual Step Rise and Total Run
- 4:32–5:10 Calculate Individual Riser Height
Step 3: Calculate Number of Treads
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 2:59–6:51 Calculate Number of Risers and Treads
Step 4: Determine Run Per Tread
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
Step 5: Calculate Diagonal Stringer Length
- 0:20–0:39 Calculate Stringer Length with Rise and Run (this video)
- 7:31–8:06 Calculate, Layout, and Cut Stringers
- 0:19–0:57 Calculate Stair Dimensions and Stringer Type
Step 6: Mark Stringer Lumber
- 6:12–7:01 Marking the Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 1:41–2:21 Mark Stringer Notches
How to Measure Deck Stair Stringer Length
This project outlines the process of accurately measuring and calculating the required length for deck stair stringers. It involves determining the total rise, the run of each step, and accounting for the angle of the stairs to ensure a safe and consistent tread depth and riser height. The final measurement will be used to mark and cut the stringers from lumber.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

