Calculate, Layout, and Cut Stringers
From How to Measure Deck Stair Stringer Length · Step 5 of 6 · Video by April Wilkerson

Showing 7:31–8:06 of the source video. Watch the full video with every moment.
What happens in this clip
Although not explicitly shown with a framing square in the video, the stringers must be calculated and laid out precisely. Determine the total rise (vertical height) and total run (horizontal distance) for each stair section. Refer to local building codes for permissible rise and run dimensions (typically 7-3/4 inches max rise, 10 inches min run). Divide the total rise by the number of desired steps to find the individual riser height. Divide the total run by the number of treads (number of steps minus one) to find the individual tread depth. Use a framing square with stair gauges to mark the rise and run on the stringer material. After marking, use a circular saw for the main cuts and a jigsaw or reciprocating saw for the tight corners to avoid overcutting. The video highlights that previous stringers were improperly built and had to be recalculated.
What's used
Tools
- Circular Saw
- Framing Square
- Jigsaw or Reciprocating Saw
- Pencil/Marker
- Stair Gauges
- Tape Measure
Materials
- Treated Lumber (e.g.
- 2x12)
About the full video
This project details the demolition of an old, unsafe outdoor staircase and the construction of a new, structurally sound staircase using treated lumber, professional-grade stain, post-saver sleeves, and Simpson Strong-Tie connectors. The process includes calculating stair rise and run, marking and cutting stringers, installing posts, building a platform, and attaching treads, risers, and railings.
Step 5 of 6: Calculate Diagonal Stringer Length
Use the Pythagorean theorem (a² + b² = c²) where 'a' is the total rise, 'b' is the total run, and 'c' is the diagonal length of the stringer. Alternatively, use a framing square's stair gauges or a stair calculator app/tool. This calculation gives you the length of the hypotenuse of the right triangle formed by the rise and run.
Every video in How to Measure Deck Stair Stringer Length
Step 1: Measure Total Rise
- 0:17–0:31 Measure Total Rise
- 0:34–1:02 Determine Total Rise
- 0:09–0:18 Measure Total Stair Height
Step 2: Determine Riser Height
- 1:02–2:45 Calculate Riser Dimensions
- 0:51–1:37 Calculate Individual Step Rise and Total Run
- 4:32–5:10 Calculate Individual Riser Height
Step 3: Calculate Number of Treads
- 0:54–1:13 Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 2:59–6:51 Calculate Number of Risers and Treads
Step 4: Determine Run Per Tread
- 1:13–1:29 Calculate Total Run
- 1:31–2:57 Calculate Unit Run and Total Run
- 10:55–11:31 Calculate Overall Run (Treads)
Step 5: Calculate Diagonal Stringer Length
- 0:20–0:39 Calculate Stringer Length with Rise and Run
- 7:31–8:06 Calculate, Layout, and Cut Stringers (this video)
- 0:19–0:57 Calculate Stair Dimensions and Stringer Type
Step 6: Mark Stringer Lumber
- 6:12–7:01 Marking the Stringers
- 0:57–1:08 Lay Out and Cut the First Stringer
- 1:41–2:21 Mark Stringer Notches
How to Measure Deck Stair Stringer Length
This project outlines the process of accurately measuring and calculating the required length for deck stair stringers. It involves determining the total rise, the run of each step, and accounting for the angle of the stairs to ensure a safe and consistent tread depth and riser height. The final measurement will be used to mark and cut the stringers from lumber.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

