Test and Apply Caulk
From How to Caulk Gaps Along Stair Skirt Boards · Step 4 of 7 · Video by Lowe's Home Improvement

Showing 0:51–1:07 of the source video. Watch the full video with every moment.
What happens in this clip
With the caulk gun loaded, gently squeeze the trigger until the caulk begins to dispense smoothly from the tip. Before applying to your actual project, test your caulk bead on a piece of scrap paper or a rag to ensure it's the right size and consistency. To apply the caulk, position the gun at an angle against the joint you wish to seal. Drag the gun backward along the joint while maintaining steady pressure on the trigger. Work in small, manageable sections to keep your caulk bead as even and regular as possible.
Goal: Dispense and apply a consistent bead of caulk to the prepared surface.
What's used
Tools
- Caulk Gun
- Scrap Paper
- Cardboard
About the full video
This project provides a step-by-step guide on how to effectively apply caulk to seal gaps around various surfaces in your home. It covers essential preparation, loading and operating a caulk gun, proper application techniques, smoothing the caulk bead, and tips for clean-up and storage.
What's said in this clip
load the canister in the gun and press the rod into the back of the canister until you feel it engage squeeze the trigger until the caulk is ready to dispense test your caulk bead on a piece of paper or a rag to make sure it is the right size apply the caulk by dragging the gun backwards across the joint and pulling the trigger work in small sections and try to keep your bead even and regular finish your bead with a finishing tool to push it into the corners and create a smooth surface you
Automatically transcribed from the source video.
Step 4 of 7: Apply the Caulk
Hold the caulk gun at a 45-degree angle to the gap and apply steady, even pressure to the trigger. Move the gun smoothly along the entire length of the gap, maintaining consistent pressure to create a uniform bead of caulk. Release the trigger and pull back slightly on the gun to stop the flow of caulk.
Every video in How to Caulk Gaps Along Stair Skirt Boards
Step 1: Clean the Gap
- 0:26–0:41 Prepare the Crack for Caulking
- 0:49–1:15 Caulking Gaps and Cleanup
- 0:12–0:19 Prepare and Clean the Gap
Step 2: Apply Painter's Tape
- 0:07–0:11 Mask with Painter's Tape
- 1:43–3:00 Taping Off Surfaces
- 3:37–4:12 Apply painter's tape
Step 3: Prepare the Caulk Gun and Caulk
- 1:37–1:59 Prepare the Caulk Tube and Gun
- 4:28–4:45 Prepare the Caulk Tube and Gun
- 1:04–1:28 Open the Caulk Tube
Step 4: Apply the Caulk
- 4:09–4:48 Apply and Smooth Caulk
- 0:51–1:07 Test and Apply Caulk (this video)
- 0:06–0:20 Apply the Sealant
Step 5: Tool the Caulk Bead
- 4:32–4:57 Smooth the Caulk Bead
- 0:35–0:41 Smooth the Caulk Bead
- 0:17–0:23 Tool the Caulk Bead
Step 6: Remove Painter's Tape
- 3:29–4:04 Remove Painter's Tape
- 0:10–0:11 Remove Painter's Tape
- 0:22–0:44 Remove Painter's Tape
Step 7: Clean Up
- 2:28–3:54 Clean Up Excess Caulk (Freehand)
- 0:19–0:23 Clean Up Excess Caulk
- 5:27–6:15 Final Cleanup and Inspection
How to Caulk Gaps Along Stair Skirt Boards
This project involves applying caulk to seal gaps between stair skirt boards and the adjacent wall or tread, improving aesthetics and preventing drafts.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

