Prepare the Caulk Tube and Gun
From How to Caulk Gaps Along Stair Skirt Boards · Step 3 of 7 · Video by GE Sealants

Showing 1:37–1:59 of the source video. Watch the full video with every moment.
What happens in this clip
Prepare the caulk tube by cutting the tip of its nozzle with the built-in spout cutter on your caulk gun. Remember that the farther down you cut the nozzle, the wider your caulk bead will be. After cutting, use the caulk gun's seal puncher to pierce the foil seal inside the tube. Finally, load the prepared caulk tube into the caulk gun, ensuring it's securely seated and ready for application.
Goal: Ready the caulk tube and gun for application.
What's used
Tools
- Dripless Caulk Gun Unknown (red gun shown)
- Seal Puncher Built-in on caulk gun
- Spout Cutter Built-in on caulk gun
Materials
- Caulk Tube GE Silicone 2 Window and Door
About the full video
This project provides a comprehensive guide on how to properly caulk around exterior windows and doors to prevent water damage, air leaks, mold growth, and reduce energy bills. It covers selecting the right type of silicone caulk, gathering essential tools, preparing the surface by removing old caulk, applying the new caulk effectively, and final cleanup.
Step 3 of 7: Prepare the Caulk Gun and Caulk
Cut the tip of the caulk tube at a 45-degree angle using a utility knife, creating an opening that matches the desired bead size. Puncture the inner seal of the caulk tube with the built-in poker or a long nail. Insert the caulk tube into the caulk gun and release the trigger lock.
Every video in How to Caulk Gaps Along Stair Skirt Boards
Step 1: Clean the Gap
- 0:26–0:41 Prepare the Crack for Caulking
- 0:49–1:15 Caulking Gaps and Cleanup
- 0:12–0:19 Prepare and Clean the Gap
Step 2: Apply Painter's Tape
- 0:07–0:11 Mask with Painter's Tape
- 1:43–3:00 Taping Off Surfaces
- 3:37–4:12 Apply painter's tape
Step 3: Prepare the Caulk Gun and Caulk
- 1:37–1:59 Prepare the Caulk Tube and Gun (this video)
- 4:28–4:45 Prepare the Caulk Tube and Gun
- 1:04–1:28 Open the Caulk Tube
Step 4: Apply the Caulk
- 4:09–4:48 Apply and Smooth Caulk
- 0:51–1:07 Test and Apply Caulk
- 0:06–0:20 Apply the Sealant
Step 5: Tool the Caulk Bead
- 4:32–4:57 Smooth the Caulk Bead
- 0:35–0:41 Smooth the Caulk Bead
- 0:17–0:23 Tool the Caulk Bead
Step 6: Remove Painter's Tape
- 3:29–4:04 Remove Painter's Tape
- 0:10–0:11 Remove Painter's Tape
- 0:22–0:44 Remove Painter's Tape
Step 7: Clean Up
- 2:28–3:54 Clean Up Excess Caulk (Freehand)
- 0:19–0:23 Clean Up Excess Caulk
- 5:27–6:15 Final Cleanup and Inspection
How to Caulk Gaps Along Stair Skirt Boards
This project involves applying caulk to seal gaps between stair skirt boards and the adjacent wall or tread, improving aesthetics and preventing drafts.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

