powered by

Remove Painter's Tape

From How to Caulk Gaps Along Stair Skirt Boards · Step 6 of 7 · Video by Jon Peters - Longview Woodworking

Showing 0:10–0:11 of the source video. Watch the full video with every moment.

What happens in this clip

While the caulk is still wet, carefully remove the painter's tape. Pull the tape slowly at a 45-degree angle away from the freshly applied caulk to reveal clean, sharp lines. If the caulk starts to pull up with the tape, use a utility knife to lightly score along the edge of the caulk before pulling the tape.

Goal: Reveal clean caulk lines

What's used

Tools

  • Painter's Tape

About the full video

This project details how to repair and seal a deteriorated window sill by first filling gaps with expanding foam, then trimming and smoothing it, adding a new trim piece, and finally applying caulk for a weather-tight seal and a clean finish.

Step 6 of 7: Remove Painter's Tape

Carefully and slowly pull the painter's tape away from the wall and skirt board at a 45-degree angle. Do this while the caulk is still wet to ensure a clean break and avoid pulling any of the freshly applied caulk away with the tape.

Open this step in the guide

Every video in How to Caulk Gaps Along Stair Skirt Boards

  1. Step 1: Clean the Gap

  2. Step 2: Apply Painter's Tape

  3. Step 3: Prepare the Caulk Gun and Caulk

  4. Step 4: Apply the Caulk

  5. Step 5: Tool the Caulk Bead

  6. Step 6: Remove Painter's Tape

  7. Step 7: Clean Up

How to Caulk Gaps Along Stair Skirt Boards

This project involves applying caulk to seal gaps between stair skirt boards and the adjacent wall or tread, improving aesthetics and preventing drafts.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Remove Painter's Tape — How to Caulk Gaps Along Stair Skirt Boards | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.