Apply painter's tape
From How to Caulk Gaps Along Stair Skirt Boards · Step 2 of 7 · Video by Abbotts At Home - DIY & Home

Showing 3:37–4:12 of the source video. Watch the full video with every moment.
What happens in this clip
Apply painter's tape along both sides of the gap where the caulk will be applied. This creates crisp, straight lines for the caulk bead and protects the surrounding surfaces.
Goal: Mask off caulk line
What's used
Tools
- Painter's tape 3M
About the full video
The video demonstrates the process of removing old caulk from around a bathroom sink faucet and applying new caulk for a fresh, watertight seal. It starts with removing the faucet handles using an Allen wrench to gain better access. Then, a utility knife is used to cut away the old caulk from between the countertop and the faucet bases, as well as from between the backsplash and the countertop. An old toothbrush is used to scrub away any remaining caulk residue. The area is then cleaned with isopropyl alcohol and dried with a hairdryer to ensure proper adhesion for the new caulk. Finally, painter's tape is applied to create clean lines, and new GE Advanced Silicone caulk is applied and smoothed with a wet finger. The tape is removed immediately after smoothing to reveal a clean caulk line.
What's said in this clip
try to let that dry out before you put new cocking in after drying out that opening I was ready to move on to taping and replacing the caul behind my bathroom sink you want that painters tape as close to the Gap as possible without actually covering up any of the opening don't be afraid to use smaller pieces of tape to get that line looking perfect you want it to look really nice before you apply the clocking this is going to last a while so you want it to look right the first time you do it here's a closer look at the gap between my pieces of painters tape Don't Be Afraid again like I said to use multiple pieces of painters tape go over different sections to make sure you've got your line looking nice and tight now we're ready to actually replace the caul
Automatically transcribed from the source video.
Step 2 of 7: Apply Painter's Tape
Carefully apply painter's tape to both sides of the gap where the caulk will be applied. This will help create sharp, straight lines and protect the adjacent surfaces from excess caulk.
Every video in How to Caulk Gaps Along Stair Skirt Boards
Step 1: Clean the Gap
- 0:26–0:41 Prepare the Crack for Caulking
- 0:49–1:15 Caulking Gaps and Cleanup
- 0:12–0:19 Prepare and Clean the Gap
Step 2: Apply Painter's Tape
- 0:07–0:11 Mask with Painter's Tape
- 1:43–3:00 Taping Off Surfaces
- 3:37–4:12 Apply painter's tape (this video)
Step 3: Prepare the Caulk Gun and Caulk
- 1:37–1:59 Prepare the Caulk Tube and Gun
- 4:28–4:45 Prepare the Caulk Tube and Gun
- 1:04–1:28 Open the Caulk Tube
Step 4: Apply the Caulk
- 4:09–4:48 Apply and Smooth Caulk
- 0:51–1:07 Test and Apply Caulk
- 0:06–0:20 Apply the Sealant
Step 5: Tool the Caulk Bead
- 4:32–4:57 Smooth the Caulk Bead
- 0:35–0:41 Smooth the Caulk Bead
- 0:17–0:23 Tool the Caulk Bead
Step 6: Remove Painter's Tape
- 3:29–4:04 Remove Painter's Tape
- 0:10–0:11 Remove Painter's Tape
- 0:22–0:44 Remove Painter's Tape
Step 7: Clean Up
- 2:28–3:54 Clean Up Excess Caulk (Freehand)
- 0:19–0:23 Clean Up Excess Caulk
- 5:27–6:15 Final Cleanup and Inspection
How to Caulk Gaps Along Stair Skirt Boards
This project involves applying caulk to seal gaps between stair skirt boards and the adjacent wall or tread, improving aesthetics and preventing drafts.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

