Caulking Gaps and Cleanup
From How to Caulk Gaps Along Stair Skirt Boards · Step 1 of 7 · Video by Today's Homeowner with Danny Lipford

Showing 0:49–1:15 of the source video. Watch the full video with every moment.
What happens in this clip
For gaps where two surfaces meet, such as between trim and a wall, use caulk. It's crucial to select a siliconized latex caulk that is clearly labeled as 'paintable'. Avoid using caulk that doesn't specify 'paintable' on the label. Apply the caulk into the gap using a caulk gun. Keep a wet sponge and a bucket of water nearby to wipe off any excess caulk immediately after application, ensuring a clean, smooth bead. If you prefer to use painter's tape to protect adjacent surfaces, ensure the caulk is completely dry before applying the tape to prevent a bigger mess.
Goal: Fill gaps between surfaces and ensure a smooth, paintable finish.
What's used
Tools
- Bucket of Water
- Caulk Gun
- Battery-powered caulk gun
- Damp Sponge
- Caulk tool
- Painter's Tape
- Siliconized Latex Caulk (Paintable)
- Acrylic latex caulk with silicone
- especially around trim.
About the full video
This project provides instructions on how to properly fill small holes and caulk gaps in walls before painting. It highlights common mistakes like creating flat spots when sanding spackle on textured walls and offers a better technique using a damp sponge. Additionally, it covers the correct type of caulk to use for gaps and how to clean up excess for a seamless finish.
Step 1 of 7: Clean the Gap
Use a putty knife or a stiff brush to remove any loose paint, dust, debris, or old caulk from the gap. A damp cloth can be used to wipe down the area for a cleaner surface.
Every video in How to Caulk Gaps Along Stair Skirt Boards
Step 1: Clean the Gap
- 0:26–0:41 Prepare the Crack for Caulking
- 0:49–1:15 Caulking Gaps and Cleanup (this video)
- 0:12–0:19 Prepare and Clean the Gap
Step 2: Apply Painter's Tape
- 0:07–0:11 Mask with Painter's Tape
- 1:43–3:00 Taping Off Surfaces
- 3:37–4:12 Apply painter's tape
Step 3: Prepare the Caulk Gun and Caulk
- 1:37–1:59 Prepare the Caulk Tube and Gun
- 4:28–4:45 Prepare the Caulk Tube and Gun
- 1:04–1:28 Open the Caulk Tube
Step 4: Apply the Caulk
- 4:09–4:48 Apply and Smooth Caulk
- 0:51–1:07 Test and Apply Caulk
- 0:06–0:20 Apply the Sealant
Step 5: Tool the Caulk Bead
- 4:32–4:57 Smooth the Caulk Bead
- 0:35–0:41 Smooth the Caulk Bead
- 0:17–0:23 Tool the Caulk Bead
Step 6: Remove Painter's Tape
- 3:29–4:04 Remove Painter's Tape
- 0:10–0:11 Remove Painter's Tape
- 0:22–0:44 Remove Painter's Tape
Step 7: Clean Up
- 2:28–3:54 Clean Up Excess Caulk (Freehand)
- 0:19–0:23 Clean Up Excess Caulk
- 5:27–6:15 Final Cleanup and Inspection
How to Caulk Gaps Along Stair Skirt Boards
This project involves applying caulk to seal gaps between stair skirt boards and the adjacent wall or tread, improving aesthetics and preventing drafts.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

