Apply and Smooth Caulk
From How to Caulk Gaps Along Stair Skirt Boards · Step 4 of 7 · Video by TwoFeetFirst

Showing 4:09–4:48 of the source video. Watch the full video with every moment.
What happens in this clip
Load the prepared caulk tube into the caulk gun. Position the angled tip of the caulk tube against the seam or gap you wish to seal. Apply steady pressure to the caulk gun trigger while moving the gun smoothly along the gap to create a continuous bead of caulk. Once the caulk is applied, immediately use a wet finger (or a damp paper towel wrapped around your finger) to smooth the caulk bead, pressing it firmly into the gap and wiping away any excess. Continue this process along all necessary seams and gaps.
Goal: Seal gaps and create a smooth, finished look
What's used
Tools
- Caulk Gun
Materials
- DAP Alex Plus All Purpose Acrylic Latex Caulk Plus Silicone DAP
- Paper Towels (damp)
About the full video
This project provides step-by-step instructions on how to properly apply caulk to baseboards, trim, or cabinetry to achieve a smooth, professional-looking finish. It covers selecting the right caulk, preparing the caulk tube and gun, filling larger gaps with backer rod, and applying and smoothing the caulk.
Step 4 of 7: Apply the Caulk
Hold the caulk gun at a 45-degree angle to the gap and apply steady, even pressure to the trigger. Move the gun smoothly along the entire length of the gap, maintaining consistent pressure to create a uniform bead of caulk. Release the trigger and pull back slightly on the gun to stop the flow of caulk.
Every video in How to Caulk Gaps Along Stair Skirt Boards
Step 1: Clean the Gap
- 0:26–0:41 Prepare the Crack for Caulking
- 0:49–1:15 Caulking Gaps and Cleanup
- 0:12–0:19 Prepare and Clean the Gap
Step 2: Apply Painter's Tape
- 0:07–0:11 Mask with Painter's Tape
- 1:43–3:00 Taping Off Surfaces
- 3:37–4:12 Apply painter's tape
Step 3: Prepare the Caulk Gun and Caulk
- 1:37–1:59 Prepare the Caulk Tube and Gun
- 4:28–4:45 Prepare the Caulk Tube and Gun
- 1:04–1:28 Open the Caulk Tube
Step 4: Apply the Caulk
- 4:09–4:48 Apply and Smooth Caulk (this video)
- 0:51–1:07 Test and Apply Caulk
- 0:06–0:20 Apply the Sealant
Step 5: Tool the Caulk Bead
- 4:32–4:57 Smooth the Caulk Bead
- 0:35–0:41 Smooth the Caulk Bead
- 0:17–0:23 Tool the Caulk Bead
Step 6: Remove Painter's Tape
- 3:29–4:04 Remove Painter's Tape
- 0:10–0:11 Remove Painter's Tape
- 0:22–0:44 Remove Painter's Tape
Step 7: Clean Up
- 2:28–3:54 Clean Up Excess Caulk (Freehand)
- 0:19–0:23 Clean Up Excess Caulk
- 5:27–6:15 Final Cleanup and Inspection
How to Caulk Gaps Along Stair Skirt Boards
This project involves applying caulk to seal gaps between stair skirt boards and the adjacent wall or tread, improving aesthetics and preventing drafts.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

