Remove Painter's Tape
From How to Caulk Gaps Along Stair Skirt Boards · Step 6 of 7 · Video by RomaNihoN

Showing 0:22–0:44 of the source video. Watch the full video with every moment.
What happens in this clip
Immediately after the final smoothing pass, and while the caulk is still wet, carefully and slowly peel off the painter's tape. Pull the tape at an angle (away from the caulk line) to ensure the caulk edge remains crisp and does not pull away with the tape.
Goal: Reveal a perfectly straight and clean caulk line.
About the full video
This project demonstrates a technique for expertly caulking the joints between stair treads and risers (or wall stringers) to achieve a smooth, professional-looking finish. It involves applying painter's tape, carefully applying caulk, smoothing it, wetting the caulk, performing a final smoothing pass, and then removing the tape while the caulk is still wet.
Step 6 of 7: Remove Painter's Tape
Carefully and slowly pull the painter's tape away from the wall and skirt board at a 45-degree angle. Do this while the caulk is still wet to ensure a clean break and avoid pulling any of the freshly applied caulk away with the tape.
Every video in How to Caulk Gaps Along Stair Skirt Boards
Step 1: Clean the Gap
- 0:26–0:41 Prepare the Crack for Caulking
- 0:49–1:15 Caulking Gaps and Cleanup
- 0:12–0:19 Prepare and Clean the Gap
Step 2: Apply Painter's Tape
- 0:07–0:11 Mask with Painter's Tape
- 1:43–3:00 Taping Off Surfaces
- 3:37–4:12 Apply painter's tape
Step 3: Prepare the Caulk Gun and Caulk
- 1:37–1:59 Prepare the Caulk Tube and Gun
- 4:28–4:45 Prepare the Caulk Tube and Gun
- 1:04–1:28 Open the Caulk Tube
Step 4: Apply the Caulk
- 4:09–4:48 Apply and Smooth Caulk
- 0:51–1:07 Test and Apply Caulk
- 0:06–0:20 Apply the Sealant
Step 5: Tool the Caulk Bead
- 4:32–4:57 Smooth the Caulk Bead
- 0:35–0:41 Smooth the Caulk Bead
- 0:17–0:23 Tool the Caulk Bead
Step 6: Remove Painter's Tape
- 3:29–4:04 Remove Painter's Tape
- 0:10–0:11 Remove Painter's Tape
- 0:22–0:44 Remove Painter's Tape (this video)
Step 7: Clean Up
- 2:28–3:54 Clean Up Excess Caulk (Freehand)
- 0:19–0:23 Clean Up Excess Caulk
- 5:27–6:15 Final Cleanup and Inspection
How to Caulk Gaps Along Stair Skirt Boards
This project involves applying caulk to seal gaps between stair skirt boards and the adjacent wall or tread, improving aesthetics and preventing drafts.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

