Size New Balusters

What happens in this clip

The new baluster needs to be the same length as the existing ones. In this case, the store-bought balusters are already 42 inches, matching the existing ones, so no cutting is required. If your new balusters are too long, measure an existing baluster from top to bottom. Use a miter saw or a circular saw to cut the new baluster to the correct length, ensuring to preserve any miter cut on the bottom end and make a square cut at the top. The new balusters in the video have a mitered detail on the bottom end and a square cut on the top.

Goal: Cut new balusters to match the length of existing ones

What's used

Tools

• Miter Saw
• Hand saw
• Tape Measure

Materials

• New Balusters

About the full video

This project provides step-by-step instructions on how to replace damaged deck balusters. It covers the process from removing old, nailed-on balusters to installing new ones securely with screws, emphasizing proper sizing, pre-drilling, countersinking, and spacing techniques for a durable and aesthetically pleasing result.

Step 1 of 6: Measure Existing Balusters

Select an average-sized wooden baluster and carefully measure its total length from the top to the bottom. This measurement will be crucial for cutting the new balusters to the correct size.

Open this step in the guide

Other videos for this step

• Measure and Mark New Baluster (Using Existing Template)
• Measure and Mark Baluster for Cutting