Insert Balusters into Rails

What happens in this clip

Carefully insert the prepared iron balusters into the pre-drilled holes. Start by placing the bottom end of the baluster into the hole in the shoe rail or floor. Then, angle the baluster to fit the top end into the corresponding hole in the handrail. Gently push the baluster down and ensure it seats properly in both the top and bottom holes. Repeat this process for all balusters, working systematically along the railing section.

Goal: Position all iron balusters in their respective holes

What's used

Tools

• Iron Balusters (prepared)
• Wooden Handrail (prepared)
• Wooden Shoe Rail (prepared)

About the full video

This project provides step-by-step instructions for installing decorative iron balusters into an existing wooden handrail and shoe rail (or floor-mounted base). It covers cutting the balusters to size, preparing the wooden rails with pre-drilled holes, inserting the balusters, ensuring vertical alignment, and securing them with decorative shoes and screws. The video highlights the quick and transformative process of upgrading a staircase railing with modern iron balusters.

Step 5 of 6: Install New Balusters

Apply a strong adhesive suitable for metal and wood to the ends of the wrought iron balusters, or use appropriate mounting brackets and screws as designed for the baluster system. Position each baluster in its designated spot on the railing and stair stringer, ensuring it is plumb (perfectly vertical). Hold in place until the adhesive sets or secure with fasteners. Repeat for all balusters, maintaining consistent spacing.

Open this step in the guide

Other videos for this step

• Install Metal Balusters and Caulk
• Install and Secure Iron Balusters