Scrape off Adhesive Residue
From How to Remove Carpet Staples and Tack Strips from Stairs · Step 3 of 4 · Video by Ace Hardware

Showing 1:02–1:07 of the source video. Watch the full video with every moment.
What happens in this clip
Old flooring, especially vinyl or glued-down carpet padding, often leaves behind adhesive residue. Use a scraper tool, like a paint scraper or floor scraper, to aggressively scrape off any remaining adhesive or glue from the stair treads and risers. The goal is to get the surfaces as clean and flat as possible, removing all bumps and unevenness caused by dried adhesive. This prepares the surface for proper adhesion of new flooring or a smooth finish with paint.
Goal: Thoroughly scrape any adhesive or glue residue from the stair surfaces using a scraper tool to ensure a clean and flat base.
What's used
Tools
- Scraper Tool (Paint Scraper/Floor Scraper)
About the full video
This video provides step-by-step instructions on how to efficiently remove old flooring (specifically carpeting and its underlying padding, staples, and adhesive) from stairs using a scraper tool, pliers, and a hammer. The process focuses on preparing the wooden stair surface for new flooring installation or painting by ensuring it is clean, free of debris, fasteners, and old adhesives.
Step 3 of 4: Remove Old Adhesive and Debris
After removing staples and tack strips, inspect the stairs for any leftover adhesive or carpet backing. Use a stiff putty knife or a specialized floor scraper to chip away and scrape off these residues. Hold the scraper at a low angle to avoid digging into the wood. Work across the entire surface of each tread and riser.
Every video in How to Remove Carpet Staples and Tack Strips from Stairs
Step 1: Remove Carpet Staples
- 1:19–1:49 Remove Staples and Protruding Nails
- 4:20–5:27 Extract Staples from Treads and Risers
- 0:31–0:55 Remove Tack Strips and Staples
Step 2: Remove Tack Strips
- 1:02–1:12 Remove Tack Strips
- 3:58–4:58 Remove Tack Strips
- 5:27–7:10 Remove Tack Strips
Step 3: Remove Old Adhesive and Debris
- 1:02–1:07 Scrape off Adhesive Residue (this video)
- 0:31–0:35 Remove Staples and Glue Residue
- 1:19–1:49 Remove Staples and Protruding Nails
Step 4: Clean the Stair Surface
- 3:30–4:06 Vacuuming Staircase Debris
- 0:23–0:26 Clean and Prepare Stairs for Finishing
- 2:50–3:34 Final Clean Up
How to Remove Carpet Staples and Tack Strips from Stairs
This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

