Clean and Prepare Stairs for Finishing
From How to Remove Carpet Staples and Tack Strips from Stairs · Step 4 of 4 · Video by Dani Lyn Design

Showing 0:23–0:26 of the source video. Watch the full video with every moment.
What happens in this clip
After all the carpet, tack strips, and staples have been removed, thoroughly clean the stair surface. This might involve using a utility knife to scrape off any lingering carpet padding residue or adhesive. Sweep and vacuum the stairs to remove all dust, debris, and any remaining small particles. Once cleaned, inspect the stairs for any damage, loose wood, or nail holes that need filling. While the video does not show the sanding or painting process, these steps are crucial for achieving the final desired 'slicker and cleaner look' demonstrated.
Goal: Ensure the stairs are clean and ready for subsequent finishing steps.
What's used
Tools
- Broom
- Utility Knife
- Chisel
- Vacuum Cleaner
About the full video
This project provides a step-by-step guide on how to easily remove old carpet from stairs, including tack strips and staples. It aims to transform carpeted stairs into a much slicker and cleaner aesthetic, typically for painting or refinishing.
Step 4 of 4: Clean the Stair Surface
Use a vacuum cleaner with a brush attachment to clean the entire surface of the stairs. Pay close attention to corners and edges where dust and small particles can accumulate. This step ensures a clean surface for any subsequent treatments or flooring installation.
Every video in How to Remove Carpet Staples and Tack Strips from Stairs
Step 1: Remove Carpet Staples
- 1:19–1:49 Remove Staples and Protruding Nails
- 4:20–5:27 Extract Staples from Treads and Risers
- 0:31–0:55 Remove Tack Strips and Staples
Step 2: Remove Tack Strips
- 1:02–1:12 Remove Tack Strips
- 3:58–4:58 Remove Tack Strips
- 5:27–7:10 Remove Tack Strips
Step 3: Remove Old Adhesive and Debris
- 1:02–1:07 Scrape off Adhesive Residue
- 0:31–0:35 Remove Staples and Glue Residue
- 1:19–1:49 Remove Staples and Protruding Nails
Step 4: Clean the Stair Surface
- 3:30–4:06 Vacuuming Staircase Debris
- 0:23–0:26 Clean and Prepare Stairs for Finishing (this video)
- 2:50–3:34 Final Clean Up
How to Remove Carpet Staples and Tack Strips from Stairs
This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

