Remove Tack Strips
From How to Remove Carpet Staples and Tack Strips from Stairs · Step 2 of 4 · Video by The Home Depot

Showing 1:02–1:12 of the source video. Watch the full video with every moment.
What happens in this clip
Before removing the tack strips, put on ear protection in addition to your dust mask and safety goggles, as using a hammer can be noisy. Use a flat prybar and a hammer to carefully remove all of the tack strips. If needed, place a 3-inch putty knife under the prybar to protect the stair treads and risers from damage while prying. Once removed, carefully collect the tack strip pieces and place them into a contractor-grade bag. Be extremely cautious as the tacks are very sharp.
Goal: Remove all tack strips safely
What's used
Tools
- 3-inch putty knife
- Stiff metal spatula
- Contractor-grade trash bag Husky
- Ear protection
- Flat prybar
- Crowbar
- Hammer Husky
- Leather gloves
About the full video
This DIY project provides step-by-step instructions on how to safely and efficiently remove old carpet and padding from stairs. It covers the removal of carpet, carpet padding, tack strips, and remaining fasteners, followed by cleaning and patching the stair surfaces to prepare them for a new finish.
Step 2 of 4: Remove Tack Strips
Tack strips are typically nailed into the edge of the treads. Position a pry bar under the edge of a tack strip, close to a nail. Apply gentle leverage to lift the strip. Continue this process along the entire length of the strip, moving the pry bar as needed to loosen it. Once loose, pull the strip away from the wood. Remove all tack strips on each stair.
Every video in How to Remove Carpet Staples and Tack Strips from Stairs
Step 1: Remove Carpet Staples
- 1:19–1:49 Remove Staples and Protruding Nails
- 4:20–5:27 Extract Staples from Treads and Risers
- 0:31–0:55 Remove Tack Strips and Staples
Step 2: Remove Tack Strips
- 1:02–1:12 Remove Tack Strips (this video)
- 3:58–4:58 Remove Tack Strips
- 5:27–7:10 Remove Tack Strips
Step 3: Remove Old Adhesive and Debris
- 1:02–1:07 Scrape off Adhesive Residue
- 0:31–0:35 Remove Staples and Glue Residue
- 1:19–1:49 Remove Staples and Protruding Nails
Step 4: Clean the Stair Surface
- 3:30–4:06 Vacuuming Staircase Debris
- 0:23–0:26 Clean and Prepare Stairs for Finishing
- 2:50–3:34 Final Clean Up
How to Remove Carpet Staples and Tack Strips from Stairs
This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

