Remove Tack Strips
From How to Remove Carpet Staples and Tack Strips from Stairs · Step 2 of 4 · Video by HouseImprovements

Showing 5:27–7:10 of the source video. Watch the full video with every moment.
What happens in this clip
Tack strips are wooden strips with sharp nails that hold the carpet in place. If you are re-carpeting, you might leave these in place. However, for hard flooring like laminate or wood, they must be removed. Use the flat, angled end of a pry bar, such as a duckbill or cats paw, to carefully wedge underneath the tack strips. Apply leverage to lift them from the wood. These strips are also quite sharp and brittle, so handle them with care to avoid injury and to prevent them from breaking into many small pieces. Some nails from the tack strips might remain in the wood; remove these with pliers or the pry bar if possible.
Goal: If installing hard flooring, use a pry bar to remove the tack strips from the edges of the treads and risers.
What's used
Tools
- Pliers
- Pry Bar (Duckbill/Cats Paw)
- Work Gloves
About the full video
This video provides a detailed guide on how to safely and efficiently remove old carpet and its underlying components (underpad, tack strips, staples) from stairs. The process covers cutting and pulling off carpet, detaching underpad, and carefully removing all fasteners from the treads, risers, and stringers, preparing the stairs for new flooring installations.
Step 2 of 4: Remove Tack Strips
Tack strips are typically nailed into the edge of the treads. Position a pry bar under the edge of a tack strip, close to a nail. Apply gentle leverage to lift the strip. Continue this process along the entire length of the strip, moving the pry bar as needed to loosen it. Once loose, pull the strip away from the wood. Remove all tack strips on each stair.
Every video in How to Remove Carpet Staples and Tack Strips from Stairs
Step 1: Remove Carpet Staples
- 1:19–1:49 Remove Staples and Protruding Nails
- 4:20–5:27 Extract Staples from Treads and Risers
- 0:31–0:55 Remove Tack Strips and Staples
Step 2: Remove Tack Strips
- 1:02–1:12 Remove Tack Strips
- 3:58–4:58 Remove Tack Strips
- 5:27–7:10 Remove Tack Strips (this video)
Step 3: Remove Old Adhesive and Debris
- 1:02–1:07 Scrape off Adhesive Residue
- 0:31–0:35 Remove Staples and Glue Residue
- 1:19–1:49 Remove Staples and Protruding Nails
Step 4: Clean the Stair Surface
- 3:30–4:06 Vacuuming Staircase Debris
- 0:23–0:26 Clean and Prepare Stairs for Finishing
- 2:50–3:34 Final Clean Up
How to Remove Carpet Staples and Tack Strips from Stairs
This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

