Remove Staples and Glue Residue
From How to Remove Carpet Staples and Tack Strips from Stairs · Step 3 of 4 · Video by Project Junkeez

Showing 0:31–0:35 of the source video. Watch the full video with every moment.
What happens in this clip
The remnants of old carpet, including staples, tack strips, and adhesive, must be completely removed from the stair surfaces. These residues can interfere with the proper adhesion of new treads and risers, and will create imperfections if staining the existing wood directly. A pry bar and hammer are effective for removing staples and scraping off dried glue. Ensure the wood surface is as clean and smooth as possible after this step, as any remaining imperfections will show through a new stain.
Goal: Given that the stairs previously had carpet, it's essential to meticulously remove all staples, glue, and other carpet-related residues from the wooden surfaces of the treads and risers.
What's used
Tools
- Claw Hammer
- Pry Bar / Wonder Bar
About the full video
This video details the extensive preparation required for a stair renovation, focusing on structural modifications and surface readiness before any finishing work, such as applying oil-based stain. It covers removing existing carpet and its residue, modifying baluster heights, and reinforcing the structure for new posts and treads.
Step 3 of 4: Remove Old Adhesive and Debris
After removing staples and tack strips, inspect the stairs for any leftover adhesive or carpet backing. Use a stiff putty knife or a specialized floor scraper to chip away and scrape off these residues. Hold the scraper at a low angle to avoid digging into the wood. Work across the entire surface of each tread and riser.
Every video in How to Remove Carpet Staples and Tack Strips from Stairs
Step 1: Remove Carpet Staples
- 1:19–1:49 Remove Staples and Protruding Nails
- 4:20–5:27 Extract Staples from Treads and Risers
- 0:31–0:55 Remove Tack Strips and Staples
Step 2: Remove Tack Strips
- 1:02–1:12 Remove Tack Strips
- 3:58–4:58 Remove Tack Strips
- 5:27–7:10 Remove Tack Strips
Step 3: Remove Old Adhesive and Debris
- 1:02–1:07 Scrape off Adhesive Residue
- 0:31–0:35 Remove Staples and Glue Residue (this video)
- 1:19–1:49 Remove Staples and Protruding Nails
Step 4: Clean the Stair Surface
- 3:30–4:06 Vacuuming Staircase Debris
- 0:23–0:26 Clean and Prepare Stairs for Finishing
- 2:50–3:34 Final Clean Up
How to Remove Carpet Staples and Tack Strips from Stairs
This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

