powered by

Remove Tack Strips and Staples

From How to Remove Carpet Staples and Tack Strips from Stairs · Step 1 of 4 · Video by Welcome to the Woods

Showing 0:31–0:55 of the source video. Watch the full video with every moment.

What happens in this clip

After removing the carpet, carefully pull off all the tack strips from the risers and treads. Next, use a hammer and pliers to remove all the remaining staples embedded in the wood underlayment and along the edges of each tread. This is a tedious process, as there can be numerous staples on each stair. The video shows using both a hammer claw and pliers for this task.

Goal: Clear the stairs of all tack strips and staples, leaving a smooth surface.

What's used

Tools

  • Ear Protection
  • Earplugs
  • Hammer
  • Pliers

About the full video

This DIY project details the complete transformation of an old, carpeted staircase into a modern, visually appealing set of stairs with laminate treads and painted risers. The process involves removing old carpet, prepping the stairs, painting, modifying existing treads, installing new laminate, and reinstalling a painted railing.

What's said in this clip

good workout to do this. I pulled off all of the tack strips from the carpet on the risers and the treads. And I knocked out all of those staples that you see from the underllayment. And the edge of each tread had like I don't know 50 staples each that I had to pull out with pliers. It was so tedious. And when I was done, I had so many blemishes to fix. So, I grabbed some high quality

Automatically transcribed from the source video.

Step 1 of 4: Remove Carpet Staples

Begin by locating all carpet staples. Insert the tip of a flathead screwdriver under the head of a staple and gently pry upwards. For stubborn staples, use needle-nose pliers to grip the staple and pull it straight out. Work methodically across each tread and riser, removing all staples.

Open this step in the guide

Every video in How to Remove Carpet Staples and Tack Strips from Stairs

  1. Step 1: Remove Carpet Staples

  2. Step 2: Remove Tack Strips

  3. Step 3: Remove Old Adhesive and Debris

  4. Step 4: Clean the Stair Surface

Questions about How to Remove Carpet Staples and Tack Strips from Stairs

What are the essential tools I'll need for effectively removing carpet staples and tack strips from stairs?

You'll definitely need a pry bar (like the Stanley Wonder Bar), pliers, and a flat head screwdriver for prying and pulling. A hammer can assist with the pry bar, and a floor scraper or putty knife is crucial for adhesive removal. Don't forget a shop vacuum for cleanup and heavy-duty gloves for protection.

What are the most important safety precautions to take when removing old carpet components from stairs?

Always wear sturdy work gloves and eye protection to guard against sharp staples, tack strip nails, and flying debris. Ensure good ventilation if using a heat gun for adhesive, and wear closed-toe shoes. Take your time, especially on stairs, to avoid slips and trips.

How can I avoid damaging the wood stairs underneath while removing staples and tack strips?

When prying up tack strips, use a wood shim or a piece of scrap wood under your pry bar to protect the stair surface from dents. For staples, gently pry them up with a screwdriver or pliers, pulling straight out rather than rocking. Avoid aggressive scraping when removing adhesive to prevent gouging the wood.

I've removed the staples and tack strips, but there's still a lot of old, stubborn adhesive residue. What's the best way to get it off?

A heat gun on a low setting can soften stubborn adhesive, making it easier to scrape off with a floor scraper or putty knife. Work in small sections, applying heat for short bursts. Always test an inconspicuous area first to ensure the heat doesn't damage your stairs.

Is removing carpet staples and tack strips from stairs really a beginner-friendly project, and how long should I expect it to take?

Yes, this project is considered beginner-friendly as it doesn't require complex skills, but it does demand patience and attention to detail. For a standard staircase, expect it to take around 4 hours, though this can vary based on the number of stairs and the amount of adhesive. Taking breaks will help you maintain focus.

What's the safest way to dispose of the sharp staples and tack strips after removal?

Collect all staples, nails, and tack strips in a puncture-proof container, such as a sturdy cardboard box, a thick plastic jug, or an old coffee can. Seal the container securely and clearly label it as containing sharp objects before placing it in your regular trash. This prevents injury to sanitation workers.

How to Remove Carpet Staples and Tack Strips from Stairs

This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Remove Tack Strips and Staples — How to Remove Carpet Staples and Tack Strips from Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.