powered by

Remove Staples and Protruding Nails

From How to Remove Carpet Staples and Tack Strips from Stairs · Step 1 of 4 · Video by Ace Hardware

Showing 1:19–1:49 of the source video. Watch the full video with every moment.

What happens in this clip

After removing the pad and tack strips, there will likely be numerous staples left embedded in the wooden stairs. To find them, use a scraper or a dustpan to sweep across the surface of the steps; you'll hear or feel when you hit a staple. Use needle-nose pliers or a nail puller to grip and extract each staple. Some staples may be too flush or stubborn, so you might need to use a pry bar or a flathead screwdriver to gently pry them up from underneath before pulling them out. As you clean, you may also find a nail or two sticking up from the subfloor; use a hammer to pound these firmly back into the wood until they are flush or slightly countersunk.

Goal: Thoroughly remove all remaining staples and pound down any nails that are still sticking out from the subfloor.

What's used

Tools

  • Dustpan
  • Flathead Screwdriver
  • Hammer
  • Nail Puller
  • Needle-Nose Pliers
  • Pry Bar
  • Scraper

About the full video

This video provides a detailed guide on how to remove old carpeting, carpet padding, tack strips, staples, and any protruding nails from a wooden staircase. It covers the entire demolition and initial cleanup process to prepare the stairs for a new flooring installation.

Step 1 of 4: Remove Carpet Staples

Begin by locating all carpet staples. Insert the tip of a flathead screwdriver under the head of a staple and gently pry upwards. For stubborn staples, use needle-nose pliers to grip the staple and pull it straight out. Work methodically across each tread and riser, removing all staples.

Open this step in the guide

Every video in How to Remove Carpet Staples and Tack Strips from Stairs

  1. Step 1: Remove Carpet Staples

  2. Step 2: Remove Tack Strips

  3. Step 3: Remove Old Adhesive and Debris

  4. Step 4: Clean the Stair Surface

How to Remove Carpet Staples and Tack Strips from Stairs

This project involves safely removing carpet staples and tack strips from stairs to prepare the surface for a new flooring material or for refinishing. It requires careful attention to detail to avoid damaging the underlying stairs.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Remove Staples and Protruding Nails — How to Remove Carpet Staples and Tack Strips from Stairs | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.