Prime and Paint Railing
From How to Fix a Wobbly Outdoor Stair Railing · Step 5 of 5 · Video by Enduring Charm LLC

Showing 8:57–9:08 of the source video. Watch the full video with every moment.
What happens in this clip
After all new balusters are installed and secured, the final step is to prime and paint the entire railing, including the new balusters. This ensures a consistent finish and adds another layer of protection to the wood. The narrator recommends using two coats of a quality exterior paint, such as Benjamin Moore, for durability and aesthetic appeal.
Goal: Apply final protective and aesthetic coats to the railing
What's used
Tools
- Paint Brush
- Paint sprayer
Materials
- Exterior Primer
- Quality Exterior Paint Benjamin Moore
- Behr exterior paint
About the full video
This project outlines the process of replacing rotten wooden balusters on a deck or porch railing. It covers fabricating new cedar balusters with a decorative profile, treating their ends with a copper-based wood preservative to prevent future rot, removing the old damaged balusters, preparing the railing, and finally installing and securing the new balusters.
Step 5 of 5: Test Stability and Finish
Once all repairs and reinforcements are made, systematically test the entire railing again by pushing and pulling on all components. Ensure there is no wobble or movement. If the railing is stable, clean off any dust or debris. If the wood is unfinished or repairs have exposed new wood, apply an exterior-grade sealant, stain, or paint to protect it from the elements and match existing finishes.
Every video in How to Fix a Wobbly Outdoor Stair Railing
Step 1: Inspect the Stair Railing
- 0:00–1:04 Identify Wobbly Railing Issues
- 0:21–0:29 Check Individual Baluster Security
- 0:20–0:28 Check Baluster Security
Step 2: Tighten Loose Fasteners
- 1:07–1:49 Re-secure Loose Deck Screws
- 0:34–0:35 Inspect and Tighten Hardware
- 0:08–0:13 Re-secure Loose Fasteners
Step 3: Reinforce Loose Posts
- 3:14–3:49 Install New Lag Bolts in Flat Posts
- 5:04–5:17 Install Lag Bolts in Corner Posts
- 2:41–2:51 Countersink and Secure Baluster Post
Step 4: Repair or Replace Damaged Components
- 0:10–0:16 Insert New Wood and Apply Epoxy Filler
- 12:26–12:44 Cut and Install Salvaged Timber
- 0:08–0:13 Install New Wood Reinforcement
Step 5: Test Stability and Finish
- 15:21–16:35 Final Inspection and Finishing Touches
- 0:26–0:33 Final Inspection and Readiness Check
- 8:57–9:08 Prime and Paint Railing (this video)
How to Fix a Wobbly Outdoor Stair Railing
This project outlines the steps to diagnose and fix a wobbly outdoor stair railing, ensuring its stability and safety. The process involves identifying the loose connections, reinforcing or replacing components, and testing the railing's sturdiness.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

